Search results

I am trying to put a ad up for my car forsale for the last time and can't do I have to pay to place the ad now? Thanks Nick.

HI all, I am in the process of re-commisioning my Z31 ready for the Mot and when I start the engine there is a clicking from the drivers side kick panel, and the heater blower comes on and off in time with the clicking also the temp guage doesn't work when this happens, anyone had this problem...

Hi all it seems I have to charge my battery more than I should have to, and was wondering if a few people can check the vlotage across the battery with a Volt meter. 1 when everything on the car is off ( this gives battery voltage) 2 start the car bring the revs up to 1500rpm ( this should...

Hi what Oil do people use in the R200 open diffs/ spec wise for track day fast road use? I have welded the pin in the latest diff so hopefully all will be good, looks like I've hit on a winner with the 3.54 for a turbo car supposed to be better, oh well we'll see..:thumbs:

Hi does anyone know if you can get standard height springs but uprated as mine seems abit low on the rear but I like the uprated spring rates just seems to bottom out too much..can't get my exhaust any higher as it's up against the front diff mount recess..? I think mine were 1 inch dropped and...

Well i finally fitted my welded diff and after reading and taking in all the comments about don't drive it on the road and it's awful/ great hardly different from normal I can say, I don't like it, the locked diff has bearing noise which comes and goes but is a pig to turn feels like your...

Hi I was out driving the car ready for Saturday Drag meet when the dreaded noise returned from the rear end, the car that is, so I thought sod it and pulled the diff out drained the oil which showed something was being eaten, turns out the carrier pin, has come loose and worked it's way out of...

Well I'm still in one piece and my car is too, can't say that for all the people there on the day, there was some great cars at the Help for Heroes track day, and I managed to put my car through it's paces, not as much as I would have liked but decided to be cautious as there was alot to hit...

Hi all, I have fitted my S13/s30 gearbox but now have no speedo, what have you guys done? I just used the original drive and housing from the 240z box but looks like it's not getting driven? Also which reverse light switch did you use?( as lamps now stay on) Box is smooth need to fabricate a...

Hi what spec oil are you guys using in your S13- S14a 5 speed conversions? just put mine together and will be fitting shortly.:thumbs:

Hi all just seen this thread might be doing this as its not opened up much at all, quite close to me and as I can't do Japfest it maybe the thing, be good to say you've driven it! http://www.mazdaontrack.co.uk/help-for-her...-event-26-c.asp

Here's a picture from HybridZ site over 400bhp, no grip on the rear, goodbye lamp post, OUCH!!

To all, Myself, Nick and a group of friends have come together as a team called DADS ARMY to trek to the top of Snowdon on the 16th May 2009 to raise awareness of Prostate Cancer, and money for The Prostate Cancer Research Centre. We are doing this through an organized event called Snowdon 500...

Hi all I know a couple of you are running Megasquirt EFI and was wondering if anyone had a IAT sensor, going spare as I have killed mine on a relocation exercise, I moved it to a new location bolted it in now it reads -40'C Serves me right for trying to improve things...:unsure:

Here's a question for the 280zx and some Z31 owners that are fitted with a injector cooling fan setup, how long do these fan come on for and when do they come on, I ask the question as I'm considering fitting one to my 240z for the summer if it gets hot. just to help with heat soak of the injectors.

Check this out!!! lol YouTube - Return-Of-The-Black-Stig

Ok I've spent ages today fitting and sorting the wiring in my car to fit my new Kenwood CD/ USB head unit, all done works great but where do i fit me speakers I have 4 smallish round 115w jobbies to fit, there's just nowhere to fit them in the front so,:unsure: 2 by the rear lights and maybe 2...

I have a R200 3.7 ratio diff that I have started to weld solid just for fun and also to see if it get me away faster at the drag strip, now I have more grip better tyres this should help does anyone think it will be worth fitting and seeing if I can get my 0-60ft times down, or should I stick...

Has anyone seen the current Banzai Mag with the SR20 engined 520bhp 240z check it out, I was so blown away that I'm not sure it was Banzai mag, as I didn't have the money to by it there and then. Check out the interior!! :D

Just got the laptop fired up and been waiting for a dry evening to try my new leaner boost fueling map in the car, just got the kids to sleep get the keys, open the front door and it's pooring down with rain, no grip then!!! :( it's hard to datalogg when your wheels are just spinning... Bang...