Removing ignition switch security screws

[toopy]

Any advice on the best way to proceed with the above?

Assume you can just put normal screws back in afterwards?

 

[jonbills]

I'm planning to attack mine with a drill or grinder, whatever I can get in there without damaging anything important.

Interested to hear the voices of experience!

 

[8658kv]

Any advice on the best way to proceed with the above?

Assume you can just put normal screws back in afterwards?

As per video below, centre punch or screwdriver. Loosen both first, usually just spin out by hand, once loosened.

 

[candy red]

Any advice on the best way to proceed with the above?

Assume you can just put normal screws back in afterwards?

I’ve done this a couple of times before if you get a flat head screwdriver roughly the size if the sheared bolts and place in the centre of said stud to be removed, a few gentle taps while turning anti-clockwise they will come out easily you should be able to get shear bolts to replace hope this helps

 

[moggy240]

I just put some torx head bolts back in mine or you could use Allen key head bolts etc