Front Discs

Fastededdie

Club Member
Hi All Merry X Mas and all that Jazz. Where on this planet can I get a set of front vented discs for my 260 I have the Hilux w13 pads on and they are working with the old solid discs ok! But finding something good to fit is becoming a daily choir. Can some one please point me in the right direction.?

Went to Silverline but they don't sell the discs in pairs. So they say yet they advertise them. To mingy to split a set or cant be asked.

Thanks

Also need a plug and play relay for my headlights.. I know I am a demanding little brat .
 
Where on this planet can I get a set of front vented discs for my 260 I have the Hilux w13 pads on and they are working with the old solid discs ok! But finding something good to fit is becoming a daily choir. Can some one please point me in the right direction.?

.

Current set up is factory discs (non vented) and you want to upgrade to vented variety ? :conf2:
 
I have a headlight relay set for sale. The option on vented discs is to buy peugeot 504gti discs and get them machined
 
Hi my car is right hand drive so I guess the left. Just need to hook my lights up to the alternator or the battery thus taking the power away from all the other stuff going on. Need a headlight harness. Like a plug a play system. Franky thanks
 
I assume you realise that a vented disc will be wider than a solid one - will your calipers fit over them?
 
300zx Z31 non turbo vented discs from rock auto, if they still do them! not sure if you'll need a spacer though
 
Terrible pics but I got my discs from Hi Spec in Dartford albeit for a mk1 golf that were such a bad fit I threw them in the shed but dug them out for this

AE1DB1A6-6D8E-4877-B485-CE6F3F087EDA.jpeg F6C55C21-BD29-4921-BF55-7E4B2F0DBF51.jpeg
 
Hi yes as I've the Hylux S12

do they have to a small piston and and big piston ?

(S12 are for non vented and S12W are for the vented disc) measure the gap where the disc runs

They are liking the early 4 pot Hilux caliper that bolts straight on for solid standard discs , they wont be wide enough for a vented disc , you would need to get some later Hilux calipers that are designed for a vented disc , you will also need a spacer to get them in the right position , as said above 300zx non turbo disc's can be had from RockAuto in the states , I tried to find 505 Peugeot GTI disc's a few years ago and with no luck , they dont make them anymore , even though some people still list them , they cant get them when you ask and pay for them, you can use MX5 discs with a bit of machining and no spacer to on 260z's but will still need the later caliper .

There is a thread I wrote on here a few years ago with all the info and photos,
 
My 240z super samuri when I did the disc on them they were AP racing ones

Mk2 escort Monte Carlo spec 25mm tarmac discs

Vented and as close as damm it same as old discs coat a bit like all good tho
 
Back
Top