Graeme - CZ
Club Member
So i'm trying to quickly source some bolts, which seem hard to find. These were threaded on my flywheel / crank - well 2 of them were. The garage has fits the threads in the crank, but need 2x replacements bolts and ideally longer, to go deeper into the crank giving the threading which occurred.
M12 x 1.25 (either 30mm or 35mm)
Aarrgghhh - this job is really turning into a bitch. Neither of the clutches i ordered fitted either (240z or 280z)
G
M12 x 1.25 (either 30mm or 35mm)
Aarrgghhh - this job is really turning into a bitch. Neither of the clutches i ordered fitted either (240z or 280z)
G