Yeah there were a lot of events on that Sunday!
So after the show I decided to drive the car up to work as it was already half way - and about 5 miles away from work my exhaust fell off! Luckily it happened RIGHT outside Peterborough services so I pulled in and assessed what happened.
The rear and middle hangers have actually corroded off the body of the car and the entire rear section hit the floor (creating a bunch of sparks which is the only reason I noticed, +1 for the noise cancelling headphones
) I had a bunch of heavy duty cable ties so I put them together and hung the exhaust off the rear crossmember and another shaft which I'm not acutally sure what it is - but is connected to the rear crossmember and seemed pretty strong. I also threw in a bungie cord for good measure.
I had no time or tools to do anything about it there so I figured I'd try and get home (~120 miles) with my new cable tied system in place. I baby'd it all the way down and surprisingly had absolute no issues. I got back and parked it in the garage, had a quick check underneath and the cable ties are still in fantastic condition - I thought I'd of seen some melting or possible a couple snapped. This was a relief, and it means I can look for somewhere to re-weld the hanging plates back to the underside of the car - I assume any old exhaust place would easily do this