itb’s kit | The Z Club of Great Britain
  1. The Z Club relies on the support of it's paid members - join the club or renew your membership here.

itb’s kit

Discussion in 'S30 (240Z,260Z,280Z) Engine' started by Kamil, Oct 11, 2018.

  1. Kamil

    Kamil New Forum User

    Hi guys

    I found that kit (brand new ) what I think good price for £1600
    Itb,s kit :
    New inlet manifold
    Three Taper bore DCOE fitment throttle bodies.
    Fuel rail kit injectors and throttle position sensor
    Stainless throttle linkage

    I have l28 with N47 head but don’t know what is in side (upgrades ) so I presume is stock
    So I have a cpl of questions

    What else I would need to compleat the kit ?

    Dose the stock ecu will cope with that ?

    Please let me know any advice much appreciated

    Thanks
    Kamil
     
  2. johnymd

    johnymd
    Z Club Member

    You won’t need too much.
    Crank triger wheel
    Crank angle sensor
    Air temp sensor
    Water temp sensor
    Cam position method (for 720sync)
    Ecu and loom
    HP fuel pump and regulator
    Cop’s

    You will need the above as a minimum for any Mapable fuel and spark system. You may be able to use some parts from a 280z/280zx fi system.
     
  3. SeanDezart

    SeanDezart
    Z Club Member
    Official Trader

  4. jonbills

    jonbills
    ZClub Administrator
    Staff Member Committee Member

    I don't think you'll run that with the stock ECU without a lot of work, it's built for a common throttle body.
    I think you'll need a new one.
     
  5. Kamil

    Kamil New Forum User

    Do I need lambda sensor as well?
    What’s the cop’s ?
     
  6. Kamil

    Kamil New Forum User

    cosworth415 likes this.
  7. Kamil

    Kamil New Forum User

    Yea that was what I was thinking
     

Share This Page