Ped
Club Member
I was going to get my injectors inspected and cleaned on the 280zx. The car runs pretty well, but the exhaust always smells way too rich.
I have a contact who has the facilities and kit to do this. I showed him pics of the injectors and he reckoned they should just pull out after undoing the screws.
My only though was that it would need new seals as they are bound to be rock hard. He didnt seem to think there would be any issues.
So... my question was, are all the parts for these readily available? I guess the seals are, but are the black plastic spacers likely to disintegrate on removal? Anything else I should be aware of?
The part number on the injectors is A46-000001.
Thanks!
I have a contact who has the facilities and kit to do this. I showed him pics of the injectors and he reckoned they should just pull out after undoing the screws.
My only though was that it would need new seals as they are bound to be rock hard. He didnt seem to think there would be any issues.
So... my question was, are all the parts for these readily available? I guess the seals are, but are the black plastic spacers likely to disintegrate on removal? Anything else I should be aware of?
The part number on the injectors is A46-000001.
Thanks!