JW240
Active Forum User
Morning all, I was wondering if someone could help, i have looked online but found nothing.
When reinstalling my wiring loom I have noticed there is no power from the blue wire that feeds the blower sub harness. The grounds are all ok so I used the wiring diagram and found this wire becomes a blue with red tracer stripe, followed it along and i have no 30 amp fuse, so checked the fuse in the fuse box and its good, the relay it goes too works also.
I'm not great at wiring and I'm now thoroughly frustrated by the lack of power here. It all worked before i took it out for paint, the blower itself is all fine just no power from that wire!!
When reinstalling my wiring loom I have noticed there is no power from the blue wire that feeds the blower sub harness. The grounds are all ok so I used the wiring diagram and found this wire becomes a blue with red tracer stripe, followed it along and i have no 30 amp fuse, so checked the fuse in the fuse box and its good, the relay it goes too works also.
I'm not great at wiring and I'm now thoroughly frustrated by the lack of power here. It all worked before i took it out for paint, the blower itself is all fine just no power from that wire!!