Turn & Burn
Club Member
Hopefully someone can help with this...
The fusible link that runs the headlights on the 240z/260z is generally a 50amp link, does this link feed anything else? I can tell it feeds the rear lights, but it doesn’t feed the front sidelights. I don’t have enough of the car assembled to get the full picture of there is more than this. The wiring diagram is just hard work!
I’m doing a relay conversion on the headlights and was going to do away with the fusible links at the same time and replace them with maxi blades, but if the headlights come off the old circuit and get their own fuse feeds the old circuit will be way over fused on a maxi blade and probably only needs a 20amp normal blade or less.
Thanks
The fusible link that runs the headlights on the 240z/260z is generally a 50amp link, does this link feed anything else? I can tell it feeds the rear lights, but it doesn’t feed the front sidelights. I don’t have enough of the car assembled to get the full picture of there is more than this. The wiring diagram is just hard work!
I’m doing a relay conversion on the headlights and was going to do away with the fusible links at the same time and replace them with maxi blades, but if the headlights come off the old circuit and get their own fuse feeds the old circuit will be way over fused on a maxi blade and probably only needs a 20amp normal blade or less.
Thanks