SSR Mesh Deep Dish Wheels 15x8J ET1 - 15x10 ET-40 / 4x114

R

ryn004

Active Forum User
I'm selling my staggered set of original SSR Mesh wheels.


PCD: 4x114
Front: 8J +1
Rear: 10J -40

Selling because I have changed my mind and do not want to cut my fenders. The rear wheels are in great condition, however the front ones will need some refurbishment to bring it back to looking new.

Bought for €1750 and will sell for anything near the value. Will also consider part exchange with other 15" or 16" 4x114 wheels that are around 8J or 8.5J with low offset.











More photos here

Wheels are located in Malta (Europe) and willing to ship and buyers expense.
 
I love those wheels, looked for some for ages and would have been interested much if I had not got the enkei's last winter, and if I'd any spare cash I'd still be tempted today...GLWS :D
 
Is your car still with the standard arches? If so what wheel width and offset are your wheels?
 
Yes my car still has standard arches and the wheels are 15x8J zero offset all round...
 
JK240 said:
Yes my car still has standard arches and the wheels are 15x8J zero offset all round...
Click to expand...

Good to hear, how many millemeters (mm) are left between the fender and tyre? I'd like to see if I can get 8J at a negative offset.
 
Hope this helps a little....?
image.jpg
 
JK240 said:
Hope this helps a little....?
image.jpg
Click to expand...

You are measuring the wrong clearance:eek:...that is largely dependant on tyre profile choice and lowering springs. I believe what the OP wants is the measurements from a arch clearance perspective...ie does the wheel tuck in inside the arch on full upwards travel or will it hit then arch.
 
Thanks for taking the tiem to measure but as datsfun pointed out I need the measurement from the tire wall to the inner arch.


Example
201780d1297649395-alfa-romeo-1978-116-gt-sports-sedan-history-pics-compressed-pic-alfa-sports-sedan-rear-lhs-wheel-arch-pics-12-02-2011-tape-measure-looking-dow.jpg
 
Haven't got measurements but my wheels & tyres are pretty much a perfect fit, must be talking a centimeter or 2 max. I've even followed the Z in another car and they tuck under the stock arches fine, no rubbing.

Rota Grid V 15x8 et0
Toyo Proxes T1R 225/50/15

Suspension has been lowered slightly too.

(I usually use a tyre fitment website to use the above sizes as a base reference. I then input new rim & tyre sizes as a comparison to the base reference to get a rough idea on whether they'll fit. Not sure about other websites but willtheyfit.com give measurements on wheel arch space loss etc.)
 
You must log in or register to reply here.
Back
Top