Russ
Club Member
Yeah AC, I tested the feed for the power supply board from the transformer, which says 14v. It was 14.4 with no load so that's ok so I went on to test the transistor (the bit on the metal heatsink you mentioned previously).
At the moment the second i plug the power supply board in it takes the fuse out for the 14v feed, so I'll probably try replacing the transistor first and see if that stops eating fuses ? Once I can plug it back in (I shoulda bought the one you sent a link for!) I can test the reset voltage
Cheers
At the moment the second i plug the power supply board in it takes the fuse out for the 14v feed, so I'll probably try replacing the transistor first and see if that stops eating fuses ? Once I can plug it back in (I shoulda bought the one you sent a link for!) I can test the reset voltage
Cheers