-
The Z Club relies on the support of it's paid members - join the club or renew your membership here.
JapShow 2013 @ Santapod 29th/30th June
- Thread starter MarkDerby
- Start date
Great day 11.43 @ 126mph, 1.91s 60'.
Good result.
Can you tell me.....
What weight the car is currently.?
Was that run with NOS???
What flywheel power are you making to acheive those times.?
Is your flywheel power including NOS or is NOS on top of that figure?
PM me if you dont want to discuss/post on here.
Wyn
Club Member
I had a great day
No issues with mine and it was nice that my daughter came along and enjoyed herself
Not sure is shes just angling for me Z lol
Good of the 300zx peeps to let us use their spot and again thanks for mike and his words of wisdom
Just to add fav pic of the day ... of mine
No issues with mine and it was nice that my daughter came along and enjoyed herself
Not sure is shes just angling for me Z lol
Good of the 300zx peeps to let us use their spot and again thanks for mike and his words of wisdom
Just to add fav pic of the day ... of mine
Attachments
johnymd
Club Member
Sorry for the short post last night as I had to take care of my sunburn. So, a big thank you to the 300zx club for allowing us to share their stand and Mike for organising the drag race challenge.
Pete - car is around around 1240kg with me in it and 1/4 tank of fuel, tools, and all the other **** I can't be bothered to take out. It's the engine is stock along with factory ecu, turbos, ect. Mods are stainless down pipe, 3" exhaust, fpr set at 55psi, ebay intercooler, and 16psi off boost (spikes to 20). Running 100hp nos but it add just under 60hp with back to back dyno testing as the turbos reach their limits. Nos via a very old minimax controller set over 3 second rise. Dyno'ed at 362bhp flywheel and 420 with nos.
Pete - car is around around 1240kg with me in it and 1/4 tank of fuel, tools, and all the other **** I can't be bothered to take out. It's the engine is stock along with factory ecu, turbos, ect. Mods are stainless down pipe, 3" exhaust, fpr set at 55psi, ebay intercooler, and 16psi off boost (spikes to 20). Running 100hp nos but it add just under 60hp with back to back dyno testing as the turbos reach their limits. Nos via a very old minimax controller set over 3 second rise. Dyno'ed at 362bhp flywheel and 420 with nos.
Hello all,
First post, the Jap Show just reaffirmed my desire for a 240! I got a few snaps here:
Flickr: Morfsx's stuff tagged with 240z Feel free to grab them if you want!
First post, the Jap Show just reaffirmed my desire for a 240!
I got a few snaps here:Flickr: Morfsx's stuff tagged with 240z Feel free to grab them if you want!