Hi guys
As per the title. I'm after some thick lash pads for my current L6 build.
I need 6x200 thou and 6x 250 thou.
Much appreciated
Matt
When you regrind the cam, the base circle of the lobe gets smaller, moving it away from the rocker, so you move the rocker up to meet the cam again by having a thicker lash pad and adjusting the tappet thing (I.e. move the rocker up at both ends, keeping it level - if you don't keep it level with a thicker lashpad, you move the cam contact patch away from the valve, and if you're not careful, off the contact pad)So why would you need a special size - valves sitting too high, valve stems short?
When you regrind the cam, the base circle of the lobe gets smaller, moving it away from the rocker, so you move the rocker up to meet the cam again by having a thicker lash pad and adjusting the tappet thing (I.e. move the rocker up at both ends, keeping it level - if you don't keep it level with a thicker lashpad, you move the cam contact patch away from the valve, and if you're not careful, off the contact pad)