Alphabettispaghetti
Club Member
Where do people get new interior plastics? It’s the one item that should be easy to get!
Do you need every bit and do they have to be new? Are you looking for the original finish or will you be modding them in any way?
is that the only place?
Just added up, $834+post, Say $1000 all in, so £1040 ish delivered. I feel a bit sick.
zcarsource.com?
https://zcarsource.com/interior-panel-set-240z
Bear in mind for that an early solid quarter/vented tailgate car you will need the matching non-vented inner quarter trim panels, not the later vented type.
Good thing about newly made stuff is that it is more pliable and less brittle than the UV and Oxygen-hardened originals...
I know the hatch trim wasn't the same. i'm struggling to find the inner quarter panels pics to see the difference.
Have you still got anything left of your originals?
I'm sure I've got photo references around here somewhere, but its simply a matter of no matrix of holes in the upper part of the quarter panel trims vs a matrix of holes in the same panel to line up with the (later) vented quarters. Both have speaker holes, but they are lower down in the rear corners.
In fact I seem to remember from years ago that at least one aftermarket supplier was making the non-vented type as a default, and if you had vented quarters you needed to get your drill out...
Have you still got anything left of your originals?
I'm sure I've got photo references around here somewhere, but its simply a matter of no matrix of holes in the upper part of the quarter panel trims vs a matrix of holes in the same panel to line up with the (later) vented quarters. Both have speaker holes, but they are lower down in the rear corners.
In fact I seem to remember from years ago that at least one aftermarket supplier was making the non-vented type as a default, and if you had vented quarters you needed to get your drill out...
I think I’ve got bits somewhere. They basically disintegrated when I removed them. As you said, age and Arizona sun.
Found an FB pic of some of the FRP ones:
https://m.facebook.com/frpautomotive/photos/a.1791102064448152/2871978746360473/?type=3
2019 price was £45 for each of the rear quarter trims.