Rubber Jobbies ;) 3D print of bungs, stoppers, etc

[Jason McIvor]

Also interested if doing a run, though if someone could provide dims that would be helpful please, as I've had to shorten the centre console recess to accomodate my cd009

Hey Makesy

Dims
Top inc Lip : 107.8mm x 82.8mm
Below Lip : 101.8mm x 76.7mm

 

[richiep]

Just registering my interest in the fuel line insulators mentioned above - I've got one or two missing from Project Dixie, so replacements would be great. And the rear hatch hinge seals. and probably other items that will come to me later! Excellent work Jason!

 

[Makesy]

Hey Makesy

Dims
Top inc Lip : 107.8mm x 82.8mm
Below Lip : 101.8mm x 76.7mm

Thank a lot Jason!

I'm away this week but will measure up and get back to you next week.

Cheers

Alex

 

[Jason McIvor]

Just registering my interest in the fuel line insulators mentioned above - I've got one or two missing from Project Dixie, so replacements would be great. And the rear hatch hinge seals. and probably other items that will come to me later! Excellent work Jason!

Richie

No probs at all

Does anyone have the dimensions of the set or anyone near me have a spare set I can copy ?

 

[Jason McIvor]

I got the 280z - so I will model these now

 

[Jason McIvor]

I got the 280z - so I will model these now
View attachment 60642

All drawn as attached

Now, can someone tell me how thick they should be ? I.e. the width of the little brackets that hold them in place ?
I'm going to run a test print tomorrow so if anyone wants some to test/try out then let me know

 

[Dale]

I would find one of these quite useful.

Datsun 240z Cupholder by musashiz

Just a simple cupholder for Datsun 240z. Replaces the ashtray in center console.

www.thingiverse.com

A quick test fit and it’s pretty snug. It will also be a bit better for coins and stuff too when I don’t have a cup in there.

Thanks for sorting Jason.

 

[Steve L]

Folks

A post full of unavoidable innuendo - my apologies

Thought I would let you all know that if anyone is looking for sets of rubbers (non-bushes etc) for stoppers, bungs, covers, etc (see pics)
I can print them for you so you don't have to go paying silly postage prices etc

Let me know if you need anything from the pics

Thanks
Jason

Hi Jason, I could do with the hatch hinge seals (L and R) please. Cheers Steve

 

[PeteRichards]

Hi Jason, I could do with the hatch hinge seals (L and R) please. Cheers Steve

Hi Jason same here please .

I’ve got a 260 2+2 but I imagine the boot hinge seals are the same as a 2 seater.