Repair Panels

[Nexussteve]

Hi guys!

I'm new to the Z scene, but they've been my favourite cars forever!
Just acquired a 260Z 2+2 for a price I couldn't turn down!

I have the usual rust issues, but finding it hard to locate repair panels in the UK.
Most companies seem to be in the US, but I'd rather not wait!
I need:

• The bottom section of the rear quarter
• Bottom of the outer door skin
• Driver's side floorpan
  
  And that's just so far! The further I go, the more worms I find!

 

[Wyn]

I can't help with the parts but they do pop up from time to time on ebay
Also MrF or PMAC who both post on here might be able to help ?

They have or can get most things Z

btw, good luck ... you will need it

 

[pmac]

Hi guys!

I'm new to the Z scene, but they've been my favourite cars forever!
Just acquired a 260Z 2+2 for a price I couldn't turn down!

I have the usual rust issues, but finding it hard to locate repair panels in the UK.
Most companies seem to be in the US, but I'd rather not wait!
I need:

• The bottom section of the rear quarter
• Bottom of the outer door skin
• Driver's side floorpan
  
  And that's just so far! The further I go, the more worms I find!

As far as Im aware the panels you are asking about dont exist for the 2+2. Only the 2 seater
Im sure Mr F will be along to further qualify or contradict wot Im saying

 

[Mr.F]

Lower door skin could be made to order.
Front floorpan section could be made to order.
Rear lower corners are different to 2 seater. Used to be available, but not seen any for years...

 

[Nexussteve]

Yeouch! Sounds like I'll be attempting to bend my own panels at this rate!

Ahhh MJP! I already have a wishlist made up for you guys, so you'll be seeing more of me!

 

[andrew muir]

Welcome to 2+2 ownership,
Many of the panels are not availiable anymore, some guys might have squirrled some away, but you will probably have too fabricate most of the panels you mentioned.

 

[Nexussteve]

Welcome to 2+2 ownership,
Many of the panels are not availiable anymore, some guys might have squirrled some away, but you will probably have too fabricate most of the panels you mentioned.

Thanks!

Bum!
Time to get good at fabricating!

 

[eastman]

Hi guys!

I'm new to the Z scene, but they've been my favourite cars forever!
Just acquired a 260Z 2+2 for a price I couldn't turn down!

I have the usual rust issues, but finding it hard to locate repair panels in the UK.
Most companies seem to be in the US, but I'd rather not wait!
I need:

• The bottom section of the rear quarter
• Bottom of the outer door skin
• Driver's side floorpan
  
  And that's just so far! The further I go, the more worms I find!

Hi, mike fe, eney does rear panel below bumper, based in onger, brentwood.