Recent content by Evanso

Nice I'll blank them off, thank you for the advice. Guessing this means I can blank off the slow running adjustment screw on the balance tube.

Hi I am rebuilding my SU carbs and can't work out what the circled red hose connection is for/goes to on each carb. The connection goes into the carb by the throttle disk. Looking at the Haynes manual it seems it might be the air fuel mixture hose that connects to the other carb and then...

Hi I am rebuilding a N36 intake manifold for my SU's. I have noticed a lot of hose connectors that I believe I won't need. I only think I will need the vacuum line attachment for the break booster on the right as going to use vent filters for crank case and valve cover breathers. Would it...

Hi Johnny Is your fiberglass air dam still for sale? I have sent you a PM. Thanks

Thank you for the advice ill give FRP Automotive a look.

Currently have stock springs at stock hight. But going to add some coilovers in the future and will probably lower the car. Would be up getting fiberglass but depends on price. Or is there any other American stores that do one cheeper? Or is best option just to look for used ones in the UK?

Hi I would be interested depending on the price. As I am not sure on getting one that is fibreglass as heard they need repairing a lot? What's been your experience with fibreglass? Thanks

Hi I am wanting to buy a plastic type 1 air dam with ducts for a 280z. One that looks likes this from the Z store, https://www.thezstore.com/page/TZS/PROD/classic02a01b/50-1412 . However, it will cost a lot to buy one from the Z store because of shipping. Does anyone know anywhere better...

Going to try my 280z gasket as think that work. Otherwise, I may have to go down the machining route.

Yes sorry I mean do I use gasket that matches the 280zx head face or 240z inlet manifold face. Thank you all for the advice. The head does have round exhaust ports and I have a 280z gasket so will use that and hope for the best.

Hi I definitely don't the trust original seatbelts in my 280z. Does anyone have any recommendations on a modern 3 point retractable seatbelt that will fit a 280z? And does not require any modifications. Thanks

Hi Going to be putting 240z SU carbs on L28 with P79 Head and I have a couple of questions. If anyone has any advice I would greatly appreciate it. Do I want to be using a gasket to fit the head or the carbs? Also what needles do people recommend for a SU L28 combination or am I okay using...

And thank you for your help.

Yh I won't risk it and I'll order one as I have to order other parts anyway.