SWB Z32 NA breaking for spares

Mr.F

Mr.F

Inactive
Very nice 1992 SWB targa NA to be dismantled for spares due to uneconomic repair after rear end collision. Some parts to be used on new project, but the following will be available:

NA engine with low mileage - never missed a beat in last seven years of ownership.
Manual gearbox SOLD and most parts to do the manual conversion (exc. flywheel and clutch - see separate listing). New hydraulics last month!Hydraulic parts SOLD Gearbox now available separately; pedal assembly available separately...
Lightweight aluminium flywheel SOLD
ACT clutch SOLD
Carbon fibre propshaft - one piece SOLD
Complete NA rear end, 4.1 ratio differential and all associated driveshafts, links etc.
Front pair Stillen cross-drilled disc rotors - NB NA only
Radiator
Pair of excellent front wing - black SOLD
Excellent bonnet - black
Pair of excellent doors - black (may split motors, glass etc.)
Pair of JDM door mirror
SWB tailgate complete
Pair of SWB targa roof panel + storage bags and sun-shields
Pair of stainless steel front pipes
Hayward & Scott stainless steel system (subject to inspection - may be slightly bent / cracked on LH side)
Underdrive crank pulley and belts SOLD
Induction pipe set - polished alloy and blue silicone
Chipped NA ECU SOLD
Top and bottom hose set - polished stainless and blue silicone SOLD
Z Centre white dial instrument cluster with delimit and speedo conversion

All the usual interior bits (rear of boot area parts damaged), tweed seats in good condition, dash parts, switch gear, electrics and misc. gizmos, why.

Call Mike on 01277 374201 for details of what is left and to discuss prices.
Cash deals preferred.
 
Last edited by a moderator:
All front undertray and wing shield parts are present and correct - call. One of the centre parts was new last year, but can't remember which...
 
Thought these were sold, but buyer has decided otherwise:

Set of Japanese home market stainless steel headers for Z32 NA - unlike most others, these fit without any bashing with a hammer! Very nice quality, good as new, available now.[SOLD]
£250.

Alleged to be good for 20bhp - the best NA mod you can do!
 
Last edited by a moderator:
Pictures of exhaust attached - damage is in a 90 degree bend which has been welded in anyway - relatively easy fix.
Boxes clean up nicely - see pic with finish achieved with a wet rag in two minutes.
One front pipe has caught a black plastic bag at some time and has melted plastic residue applied!
Otherwise in very good condition - ideally purchased as a full set due to being fabricated on the car for the customer.
 
Last edited by a moderator:
You must log in or register to reply here.
Back
Top