RyanT
Forum User
Having a shed clear out, more to potentially come.
Big Brake Kit / Front & Rear - Toyota Front - Rear Disc Conversion
Removed from my 240Z. Only selling because I have no regard for my finances and am in the process of fitting a complete Wilwood system.
This is what SilvermineMotors call their 'Front Stage 4 Big Brake Update Kit' + 15/16 Master + Wilwood Bias Value.
Front
- Toyota S12+8 calipers (these are the most desirable variant, with leading/trailing piston bore sizing)
- Fitting kit + pads
- 300ZX Vented Discs
- Toyota front vented disc spacer for 240Z hubs
Rear
- 280ZXT rear calipers
- Mounting brackets
- 280ZX rear discs
- Almost new handbrake cable
To complete the kit
- 15/16 ZXT brake master cylinder
- Wilwood proportioning valve (to be plumbed into the rear circuit if required)
The calipers, hardware, pads, spacers, proportioning valve probably have less than 2k miles on them since new.
All could benefit from a good clean after being stored. I've got braided lines to go with these which I can dig out if the buyer wants.
About $1300 + shipping and import fees if you were to buy it all new. How about -
£550
280 ZX Turbo CV Axles
Bought these because I had a clunk one on side of the car, turns out after replacement the CV wasn't the issue but the strut top. So I removed & refitted the 'original' after a couple of weeks. (Hence one is and looks brand new, the other has surface rust). The 'used' one, you can see patches where I've rubbed it clean with minimal effort.
Fits straight into an R180 / R200, get some adapter brackets (MilkFab etc) and you've got an easy CV set up for ~350ft/lb.
Paid about £300 landed from the USA. How about -
£130
240z Front Grill
It's been bashed about in my shed and one of the legs has been poorly welded. But probably still presentable & worth someone giving it some TLC. As shown in pictures.
£50
Wiper Motor
£30
Open to sensible offers
Collection from GL6 area.
WhatsApp - 07807 357440
Big Brake Kit / Front & Rear - Toyota Front - Rear Disc Conversion
Removed from my 240Z. Only selling because I have no regard for my finances and am in the process of fitting a complete Wilwood system.
This is what SilvermineMotors call their 'Front Stage 4 Big Brake Update Kit' + 15/16 Master + Wilwood Bias Value.
Front
- Toyota S12+8 calipers (these are the most desirable variant, with leading/trailing piston bore sizing)
- Fitting kit + pads
- 300ZX Vented Discs
- Toyota front vented disc spacer for 240Z hubs
Rear
- 280ZXT rear calipers
- Mounting brackets
- 280ZX rear discs
- Almost new handbrake cable
To complete the kit
- 15/16 ZXT brake master cylinder
- Wilwood proportioning valve (to be plumbed into the rear circuit if required)
The calipers, hardware, pads, spacers, proportioning valve probably have less than 2k miles on them since new.
All could benefit from a good clean after being stored. I've got braided lines to go with these which I can dig out if the buyer wants.
About $1300 + shipping and import fees if you were to buy it all new. How about -
£550
280 ZX Turbo CV Axles
Bought these because I had a clunk one on side of the car, turns out after replacement the CV wasn't the issue but the strut top. So I removed & refitted the 'original' after a couple of weeks. (Hence one is and looks brand new, the other has surface rust). The 'used' one, you can see patches where I've rubbed it clean with minimal effort.
Fits straight into an R180 / R200, get some adapter brackets (MilkFab etc) and you've got an easy CV set up for ~350ft/lb.
Paid about £300 landed from the USA. How about -
£130
240z Front Grill
It's been bashed about in my shed and one of the legs has been poorly welded. But probably still presentable & worth someone giving it some TLC. As shown in pictures.
£50
Wiper Motor
£30
Open to sensible offers
Collection from GL6 area.
WhatsApp - 07807 357440
