240z fuel return pipe on tank?

L

Leo40z

Well-Known Forum User
hi all

im now going to upgrade my current turbo setup which is made by janspeed to run the full usa spec 280zx setup.injectors,standalone ecu etc

im trying to get all the parts ready for install but i have noticed there is NO fuel return line back to the tank.

can i run one to the oem tank? if so where should i plumb it to on the tank?

many thanks

leo
 
All 240Z and 260Z tanks had a fuel return line. The spigot on the tank should still be there (probably, no - hopefully, capped!). The metal line began in the engine bay just below the OEM fuel filter position and ran in the cushioned brackets along the RH chassis rail.
 
Ill get it on the ramp in an hour and have a look. Just find it strange that with a blow through curb and the turbo there should if been one.

Thanks again mike.
 
Just checked there is a return but its been blocked off.im gonna take the tank down anyway and get -6 fittings put on.

Thanks again mr F.

Leo
 
You must log in or register to reply here.
Back
Top