Search results

I don't know if this is a dumb question(it probably is) but in the manual it says top up the auto transmission fluid with a hot engine and the car on idle, so i took the car for a 10 min drive parked on the flat and topped it up to the top mark but now when i check the level on the cold mark...

I seem to be getting some oil into my inlet manifolds so was thinking of putting a catch tank in, is there anything i should know before i do? My engine doesn't burn any oil or smoke at all even when giving it some hammer so i don't know why it's got oil in the manifold. I have looked at the...

I'm looking for a good condition Z31 with no problems, preferably a manual. Reply or PM me. Cheers.

My 300Zx seems to have a slight hesitation at around 4500-5000rpm, it idles fine and runs well but when i give it little tickle it hesitates goes hesitates goes etc, almost like a misfire. I'm going to change the plugs today to see if that solves it. Any ideas what else it may be?

I want to change the gearbox fluid on my 300zx twin turbo, which would be the best fluid to use or will any dexron fluid be suitable? Is there a filter in the box to be changed ? It's the wife's car and she said on a couple of occasions the car seems to be revving more and not moving as quick...

I'm not sure if this is the right place to post this question but i'll try it anyway. I own a 280ZX with a janspeed turbo and i am now seriously thinking of selling and getting a 300ZX, is this a dumb move? I know this is a very personal choice question but i just don't know which is the right...

I'm moving back to the UK in a few weeks and want to use an A frame one man towing device to tow my ZX behind my camper but its an auto, so am i right in thinking as long as i remove the prop i'll be ok to tow it? i know the law says you can only recover a broken down car but i'm going to chance it.

I've got a 1979 280zx which has a Janspeed turbo fitted(which was on when i bought it) and its been totally useless since i got the car so i want to remove the turbo and put it back to standard, is it as simple as taking the turbo off and putting the original ecu back on? I've tried everything...

I have a 1979 280zx but it has a more recent P90 head on it and i need to order a manifold gasket soooo from what year was the P90 head used so i don't order the wrong gasket. Any help would be good.

I've just fitted a boost gauge to my car which has a Janspeed turbo and i want to make sure everything is running hunky dorey so can anyone tell me what the boost gauge should be reading, at tick over its at .6 vac and am i right in thinking that at around 60mph it should go up to between 0.5...

Can anyone tell me where i can get some new door window weather strip for my 280ZX, i've tried Black Dragon autos, the Z store and i've even tried the main dealer, but no luck. I can get some for 240's 260's and 280's and newer 300's but for some weird reason not for the 280ZX and mine are...