This might help
Understanding the 260z and 280z wiper circuit. Reverse polarity park. - Miscellaneous Tech - HybridZ
Final parking of the wiper arms. This is the clever bit which took me a while to work out. When the wipers are switched off the DC motor reverses it’s direction due to circuitry controlled by a relay strapped on to the side of the motor (this relay is used at other times too in the wiper operation). The linkage is attached to the motor via a short arm an eccentric cam bearing and coil spring. During normal operation the eccentric cam is in a position which has the effect of shortening the linkage, when the motor reverses the coil spring tightens due to the direction of travel, grips the eccentric cam, rotates it through 180’ and lengthens the linkage thus parking the wipers lower down the screen – clever eh?
That’s why when switching to the off position the wiper always does a wipe – it’s to ‘park’ the wipers low down the screen