Matt Long
Well-Known Forum User
So if I run a straight edge across the rear wheel and down the side of the car (240) at cill level I have roughly a 50mm gap between the straight edge and the rear part of the cill, BUT at the front of the cill just before the front wing I have a 15mm gap, so in effect it looks like a hugh amount of toe in on the rear.
Is this normal?
It's just been through an MoT so the rear bushes are all good and there's no damage to the chassis.
Anyone have any ideas?
Is this normal?
It's just been through an MoT so the rear bushes are all good and there's no damage to the chassis.
Anyone have any ideas?