Northerner
Club Member
Whilst my car has the engine out, I’ve been wanting to change the bushes to solve the wandering feeling. I’ve heard S13 bushes will fit but found a set in the USA made by www.richochetpt.com part number N12.B-90 BLU. I had to measure mine as there is a thinner set. My old ones were in a state allowing the rack to move a few mm from side to side. I could see the clean mating surface were it had been wandering. Anyways, fitted these today and I’ve used a pry bar and the rack seems to be solid with no apparent movement. It will have to wait for my engine to be put back in for a road test. A little tip to avoid any movement is mark the rack prior to removing the old bushes. Old and new pictures attached.
Attachments
-
5E56F27F-E19D-4AE7-B36B-5EA5FF1608A3.jpeg204.5 KB · Views: 11
-
089105DA-DBDB-4C4B-A2ED-2008DED1C4C4.jpeg163.1 KB · Views: 8
-
991E3B7D-2352-442F-B950-1E3B3E12C962.jpeg282.2 KB · Views: 8
-
26880517-D9CB-487B-B720-5520489EE0D9.jpeg221.3 KB · Views: 8
-
9AB4B098-E7F5-49F0-BF4D-10E6B69308FA.jpeg234.6 KB · Views: 9