Rocket bunny 240z | The Z Club of Great Britain
  1. The Z Club relies on the support of it's paid members - join the club or renew your membership here.

Rocket bunny 240z

Discussion in 'S30 (240Z,260Z,280Z) Wheels and Tyres' started by Daniel Balk, Jun 16, 2019.

  1. Daniel Balk

    Daniel Balk Forum User

    hello everybody. I’m new here and wanted to ask what wheels, tires and suspension I can run with a 1972 240z with a pandem kit. I’m thinking of 17x10 in the rear and 16x9 in the back. Would this work? I may also have to run spacers in the form of bolt adapters. Even if you are running smaller flares or no flares at all any bit of information would be really useful.
  2. SacCyclone

    Z Club Member

    Could you post up a few pics of the body or has it not been attached yet??
    Daniel Balk likes this.
  3. Daniel Balk

    Daniel Balk Forum User

    Still waiting on the kit :( been a few months now but no delivery yet, Can’t find any measurements of it online either.
  4. Mark N

    Mark N
    Z Club Member

  5. moggy240

    moggy240 INSURANCE VALUATIONS OFFICER Staff Member Moderator

    Rota RBX could be a good option. 17x9.5
  6. Daniel Balk

    Daniel Balk Forum User

  7. Daniel Balk

    Daniel Balk Forum User

    They look great but I’m planning for this to be a bit more of a show car and from the 2 cars I’ve run with rota/ xxr wheels both were hated at car shows. Don’t mind the brands personally but maybe for the public image.....
  8. datsfun

    Z Club Member

    The white elephant in the room is the Rocket bunny kit. If you were concerned with the public reaction of your choice of wheels, then be prepared to absorb equal amounts of negativity regarding the kit. EXTRA;)

    As for wheel spec and sizes, my suggestion would be bespoke sizes that will fill those flared arches well. received_10155885991506458.jpeg received_10155885991471458.jpeg received_10155885991476458.jpeg
  9. franky

    Z Club Member

    18x12 all round.

    205/35/18 tyres.
  10. Makesy

    Z Club Member

    Whilst this kit isn't my personal preference, I'm just happy to see more interest in Zs and more Zs being built into running condition (even moreso on UK roads!).

    Interested to see how your project pans out!
  11. Ian

    Z Club Member

    I would not run a spacer over 5mm (10mm at a push) for so many reasons, if you cannot get wheels that fit right without spacers I would go custom made for sure.

    I can fit 16x8.5 or 17x9 wheels to my stock arch Z so you should easily be able to run 12" wheels with those arches.
  12. Daniel Balk

    Daniel Balk Forum User

    Makes sense, with all the people saying to run 12 (width) I’ll probably end up doing just that. As for diameter I’m not sure I wanna go 18 all round or maybe go 18’s in the rear and 17s inthe front, I had more of a staggered build in mind but I’m not so sure anymore :D

Share This Page