New Air box | Page 3 | The Z Club of Great Britain
  1. The Z Club relies on the support of it's paid members - join the club or renew your membership here.

New Air box

Discussion in 'S30 (240Z,260Z,280Z) Tuning & upgrades' started by atomman, Jun 4, 2019.

  1. atomman

    atomman Well-Known Forum User

  2. atomman

    atomman Well-Known Forum User

    Mold/plug is finished and the first prototype is nearly done ,

    Just a logo to add between the last layer of hot coat and a good polish . looks pretty clear from the test piece we have done and the air box should be clearer than that because its been worked less .

    Should be off the mold by end of play today hopefully , my friend is doing it as he is glassing the boards
    Pondo, Turn & Burn, AliK and 7 others like this.
  3. atomman

    atomman Well-Known Forum User

    DSC_2271.JPG DSC_2262.JPG DSC_2249.JPG Well here it is :)

    It has only had a quick once over with some cutting compound and a quick polish, but has come out pretty clear , you can quite clearly see the Titanium trumpets through it , which is what I was aiming for :)

    My friend has ordered a different epoxy today that he thinks will be clearer again which will be great , plan is to use this one to make some tweaks to the base plate for the mounting and make the ally inlet flange for the pipe to connect to
    AliK, 8658kv, Mark N and 11 others like this.
  4. johnymd

    Z Club Member

    Wow. That’s super cool.
    atomman likes this.
  5. Paul_S

    Z Club Member

    That's a whole lot of awesome!
    atomman likes this.
  6. istoo

    Z Club Member

    Love it

    Sent from my iPhone using Tapatalk
    atomman likes this.
  7. IbanezDan51

    Z Club Member

    Amazing! Group buy!
    AliK and atomman like this.
  8. 8658kv

    Z Club Member

  9. atomman

    atomman Well-Known Forum User

    Spent a few hours this morning in the garage getting it all fitted up , I know it needs a few tweaks on the base plate now, a double lip to seal the lid better and mounting holes tapping (to lose the cable ties), but for now i can do some test driving this weekend and see how it performs, ,

    My friend that helped me make the clear box has now gone to France for a month in his camper to surf, the benefits of being self employed, so I can sort out the base plate ready for his return and then we can make a clearer box with a new moulding technique that another surfboard making friend has told me about,

    DSC_2302.JPG DSC_2313.JPG
    Pondo, SacCyclone, AliK and 3 others like this.
  10. moggy240

    moggy240 INSURANCE VALUATIONS OFFICER Staff Member Moderator

    Looks really cool!!!!
    AliK likes this.

Share This Page