Help needed: torque settings for fly wheel and clutch (240z and 280z)

Graeme - CZ

Club Member
Hi folks,

I'm wondering if someone could save me the 10 mile round trip to my lockup. The Z is at the garage having the clutch and main oil seal done. They are asking for the torque settings for fly wheel and clutch?

Worth having both the 240z and 280z settings, as my engine is a bit of a hybrid.

Can anyone share a snap of the relevant Haines Manual page?

Much appreciated.

Graeme
 

Graeme - CZ

Club Member
In other news, neither the 240z clutch or the 280z clutch that ordered will fit my car. Very confusing indeed.
 

Graeme - CZ

Club Member
Also trying to source 2x bolts that hold the fly wheel to the crank. The garage has managed to re-tap the threads, but need replacement (and also longer bolts).

Anyone know where i could quickly source 2x bolts as follows:

M12 x 1.25

Either 30mm or 35mm
 

jonbills

Membership Secretary
Site Administrator
Also trying to source 2x bolts that hold the fly wheel to the crank. The garage has managed to re-tap the threads, but need replacement (and also longer bolts).

Anyone know where i could quickly source 2x bolts as follows:

M12 x 1.25

Either 30mm or 35mm
I can probably find a couple and send them to you Graeme.
 
Top