Gear selector seal and end plug

DaveF

Club Member
It appears that the selector chamber on my gearbox should have a seal and cap. Anyone know where to get these parts....or could I get away with a rubber bung?

Cheers
 

Attachments

  • 274727948_1083098252537662_4076602369638716520_n.jpg
    274727948_1083098252537662_4076602369638716520_n.jpg
    18.4 KB · Views: 8
  • IMG_20220108_135106.jpg
    IMG_20220108_135106.jpg
    139.8 KB · Views: 9

Geoff-R

Club Member
The rubber boot might still be available from Nissan, I know I purchased mine from Zcardepot and it came in a Nissan bag, I've since binned the bag when I fitted the part so can't confirm the part number but here is a link.


Interesting that you're missing the end cap. It's basically a cap tapped in and then punched (in 4 places I think, 12, 3, 6, and 9 o'clock position) to retain it.
 

DaveF

Club Member
The rubber boot might still be available from Nissan, I know I purchased mine from Zcardepot and it came in a Nissan bag, I've since binned the bag when I fitted the part so can't confirm the part number but here is a link.


Interesting that you're missing the end cap. It's basically a cap tapped in and then punched (in 4 places I think, 12, 3, 6, and 9 o'clock position) to retain it.

Hi Geoff, I've got the rubber boot and everything else, thanks - just that big hole at the end! I can make a rubber plug at work, so I'll try that I think.
 

Geoff-R

Club Member
Ah sorry, I misread, a rubber plug should work, odd that it is missing but a good fitting plug should do the trick anyway.
 
Top