3D Design & Printing

[Jason McIvor]

Folks

I'm building these lights - for hanging on the wall or using the stand. Including wifi enabled switch for Alexa/Google/Apple Home

NOT MY PHOTO

Let me know if anyone is interested - I will send a pic of my version when it's completed

 

[Huw]

Yes please!

 

[Jason McIvor]

Folks

I'm building these lights - for hanging on the wall or using the stand. Including wifi enabled switch for Alexa/Google/Apple Home
View attachment 57809
NOT MY PHOTO

Let me know if anyone is interested - I will send a pic of my version when it's completed

Mine (very rough prototype print)

 

[MCBladeRun]

Mine (very rough prototype print)

Ha! I'd be happy with the prototype

 

[uk66fastback]

Looks very good!

 

[Faster Behr]

Can you make one 6’ wide for my garage wall? That would look great.

 

[yellowz]

Can you make one 6’ wide for my garage wall?

We're gonna need a bigger printer..................................

 

[Jason McIvor]

Can you make one 6’ wide for my garage wall? That would look great.

PM'ed you

 

[Jason McIvor]

Folks
I've expanded this range
I can pretty much do any badge/logo
Doing 1991 Mini Cooper for a friend
And building an Aston Martin light also

 

[toopy]

Interested in a Datsun one

 

[Dale]

I print some of these the other week , quite handy as they are usually gone and the replacements are £180

https://www.thingiverse.com/thing:4884322

If the left one could be redesigned to use the lower hole in the radiator support panel then the LHD drive cars that are using the upper hole for the cold air intake could also get back the cold air intake to their feet!

 

[atomman]

If the left one could be redesigned to use the lower hole in the radiator support panel then the LHD drive cars that are using the upper hole for the cold air intake could also get back the cold air intake to their feet!

that's a good idea for when I get finally round to fit this

 

[Milan]

Thought I'd throw my hat in having recently purchased a Bambu P1S. Incredible what these machines can achieve.

Haven't tried anything car related yet, however a while back I ditched the rods and mechanical throttle linkage with a cable setup. It worked (much nicer drive now), eventually, but what I was left with was an ugly hack! On the carb end hand, added a mutilated aluminium lever, in conjunction with a cable ball joint (see pic). On the pedal end I drilled out the existing ball and replaced with a dual holed cable clamp. Regretting this now as I realise I could print a component to clip onto the ball and clamp the wire. Also not ideal as it does not prrovide any rotation.

Thinking about replacing both ends with 3D printed parts. Question I have is, will PAHT-CF be suitable for the carb end lever? According to Bambu docs it's heat resistant to 194 deg C. Anyone with experience for printing parts for under the hood?

Any feedback welcome.

Carb end


Pedal end clamp