Turn & Burn
Club Member
I’ve been playing around with this for a while since picking up a set of 300zx calipers. I always thought it would be good to have Nissan calipers on the car.
I did an Autocad design and transferred this onto plywood as a prototype, I’ve followed this with a real version cut from 3/4” 2014 t6 aluminium. Final finishing has been done with a drum sander I made, the end result looks professional and obv cheaper than milling or laser cutting and only took an afternoon incl making the sander.
If anyone’s interested I can let u know what the discs are, I think they’re about 293mm, fitting 15” wheels may be close.
I did an Autocad design and transferred this onto plywood as a prototype, I’ve followed this with a real version cut from 3/4” 2014 t6 aluminium. Final finishing has been done with a drum sander I made, the end result looks professional and obv cheaper than milling or laser cutting and only took an afternoon incl making the sander.
If anyone’s interested I can let u know what the discs are, I think they’re about 293mm, fitting 15” wheels may be close.
Attachments
-
8B2E5287-E37F-4FDF-AA77-AC109698CE4B.jpeg337.1 KB · Views: 112
-
6EAA6F45-518A-4855-9C80-896C58A02D7B.jpeg186.8 KB · Views: 112
-
C916661D-82B0-43B6-8D44-194136282205.jpeg219.5 KB · Views: 104
-
D54BDB00-9015-4EC5-8AA3-08331FA86047.jpeg373.8 KB · Views: 107
-
9EAB4C98-38F4-4952-A77C-B134F0484A64.jpeg300.3 KB · Views: 107
-
AE10CD94-E57A-47D6-A4D4-6709DB3EAA5B.jpeg321.2 KB · Views: 105
-
00F545A9-C79F-4CB3-B6BC-9782776E1439.jpeg328.9 KB · Views: 105
-
AD009AA0-7266-4609-B38A-68B305796100.jpeg152.6 KB · Views: 110
Last edited: