240z brake discs for samuri | The Z Club of Great Britain
  1. The Z Club relies on the support of it's paid members - join the club or renew your membership here.

240z brake discs for samuri

Discussion in '240Z / 260Z / 280Z' started by Mr Ex Jnr, May 7, 2015.

  1. Mr Ex Jnr

    Mr Ex Jnr Zeds is the way iv been shown Staff Member

    hi seeking advice for the samuri its got 4 pot calipers on, need new discs for test now i have spoken to mike, he say he belive spike put peugeot discs on as they were thinner to compensate the bigger 4 pots.

    now i could get the discs skimmed but there only so much meat on the discs and there will come a point were ill need some new ones just seeing if anyone out there got any more info

    need a brake syrvo aswell if anyone got one mike moving at the min
     
  2. Rob Gaskin

    Rob Gaskin Membership Secretary Staff Member Committee Member

    If they are Pug 505 GTi discs (good chance) they will be vented not solid.

    Any pics of your set-up?

    So you have 4 pots - are they Range Rover and do they have a spacer of about 5mm between each half to fit over the vented (wider disc)?

    You need to go to a motor factor with your's and compare with Pug's.

    Then take all your discs to an engineering firm to drill more holes for the studs (Pug spacing is not Datsun spacing) and open the centre hole to clear the hub.
     
  3. Mr Ex Jnr

    Mr Ex Jnr Zeds is the way iv been shown Staff Member

    yeah got range rover 4 pots on I haven't had the wheel off to look at the set up but I will be doing soon,

    ill get pics of set up when I take wheel off

    yeah no few people that are engineers
     
  4. Crofty

    Crofty New Forum User

    Just changed my front discs. They were pug 505 discs but I had to have them machined to fit.
     
  5. Mr Ex Jnr

    Mr Ex Jnr Zeds is the way iv been shown Staff Member

  6. Mr Ex Jnr

    Mr Ex Jnr Zeds is the way iv been shown Staff Member

  7. Rob Gaskin

    Rob Gaskin Membership Secretary Staff Member Committee Member

    Christian, they may be the right disc but I only know that mine were for a 505 Gti.
     
  8. pmac

    pmac Active Forum User

  9. Mr Ex Jnr

    Mr Ex Jnr Zeds is the way iv been shown Staff Member

    oright miss read that one add on ebay still not bad 70pound for vented
     
  10. pmac

    pmac Active Forum User

    indeed its a good price delivered.:thumbs:
     
  11. andrew muir

    andrew muir
    Z Club Member

  12. andrew muir

    andrew muir
    Z Club Member

    I got brembo discs which used to be around £50 but not sure if they make them anymore.
     
  13. Mr Ex Jnr

    Mr Ex Jnr Zeds is the way iv been shown Staff Member

    hmm took disc off sunday and put it up against the peauget 505 disc totally different sort of discs they are.
    the Datsun one has a separate disc that bolt on to an external hub that has the stud in and the bearing I need to upload a photo of the disc, anyone got any suggestions' on what disc they could be the disc is 1" thick
     
  14. SeanDezart

    SeanDezart
    Z Club Member
    Official Trader

    Franky can quote you the Samuri spec.:rolleyes:
     
  15. Mr Ex Jnr

    Mr Ex Jnr Zeds is the way iv been shown Staff Member

    few pics of the disc
     

    Attached Files:

  16. Mr Ex Jnr

    Mr Ex Jnr Zeds is the way iv been shown Staff Member

    Any1 reconise these discs
     
  17. SeanDezart

    SeanDezart
    Z Club Member
    Official Trader

    They're yours I think....:D
     
  18. Rob Gaskin

    Rob Gaskin Membership Secretary Staff Member Committee Member

    Can't help but 1" thick?

    Four suggestions:

    Separate the disc from the hub and take it to a brake 'Motor Factor' to see if they can help identify it.

    Measure the disc and try try to identify it yourself off the internet.

    Contact Kevin Irons (ex Samuri partner) who may know what options they used. I might be able to help you with that.

    Fit a new combination of Disc and caliper.
     
  19. Mr Ex Jnr

    Mr Ex Jnr Zeds is the way iv been shown Staff Member

    aright i took the 505 discs back today as they were based in Huddersfield bought of ebay tho, so they took some measurements off the disc and there ringing up Monday to find out and there going to get back to me
     
  20. Mr Ex Jnr

    Mr Ex Jnr Zeds is the way iv been shown Staff Member

    tim (zedbloke)

    found these disc on here for zed
    fhttp://www.apracing.com/product_details/race_car/brake_discs/ventilated_discs/%C3%B8260mm/25.4mm_thickness/139.7mm_p.c.d.-bolted-cp4448-226/227.aspx

    no else have this setup of brakes on there s30
     

Share This Page