240/260/280 Parts- Limited Time No Charge POST to UK

SacCyclone

Club Member
Hi everyone,

I have the following second hand parts that I am going to sell.

I am posting here first and then on the US FaceBook Zed forums in a week or so.

For a limited time, I will place any sold and paid for parts into a Zed that will be leaving Cali soon and headed for the UK. I have OK'ed this with the new owner and you must collect from him on your end at your own cost or time.

Here is a list of items for sale:

stainless trim for side marker lights (4) $10

240 inner shift gator metal trim ring $20

240 passenger side door pull with plastic chrome ends $30

240 passenger side door pull without chrome ends $10

inspection doors for hood (110 red I think) both right side $40 each

factory tie down hooks $10 each

early 240 fuel door orange with lock $sold

240 fuel door blue $40

fuel tank metal protector shield installs in rear wheel well $40

interior door latch metal finishers left and right $20

interior door armrest left and right $60

hood hinge pair in white $60

Hood hinge pair in green $60

Hood hinge single in black $20

Tool storage lids in green pair $80

hood latch spring loaded $20

rear hatch hinges pair $40

red side marker light lens (4) $20

240 center console ashtray $20

rear side marker assembly pair $20

front side marker assembly (long pigtails) $30

240 coil $40

factory hydraulic clutch line $100

PM me directly to discuss or purchase via PayPal.

Thanks, Mike

tempImagei9Ap0g.png

tempImagexhOTPb.png

tempImageZUVPHk.png

tempImage0mzB9U.png

tempImage5IfOOF.png

tempImageg4w0x4.png

tempImageo7wWGV.png

tempImagewrMa7R.png
 

SacCyclone

Club Member
260/280z tail lights US including tail light surround panels.....$250
yellow wheel chocks....$50
280z black armrests....$100

tempImagexNloBn.png

tempImageD7fMoE.png

tempImageN9WpZ7.png
 

Ian

Club Member
I might have liked to have the Tail light surrounds, but I can't see how I could possibly collect them so I'll have to skip.
 

yellowz

Club Member
I might have liked to have the Tail light surrounds, but I can't see how I could possibly collect them so I'll have to skip.
Whereabouts in the UK will the car be coming to? If it is near anyone they could pick up and post to you?
 

Robotsan

Club Member
From speaking to the owner/buyer myself, as I have some parts coming over, I believe he makes trips up north every now and again. I'm I'm Manchester, so that's any better I can help out with holding onto parts and posting.
 

SacCyclone

Club Member
Amco Electrodyne front overrider bar from 1973 for Datsun Zed with bumperettes attached to front bumper.
Comes in original box with hardware and instruction sheet. Box POST mark in 1979.
NIB
$200

tempImageQ3y26b.png

tempImageaaCvym.png
 

Ian

Club Member
If someone was heading nearby and would be willing to post them that would be great. Although looking at the photo I am now seeing that both lights are red, so that may not be what I need. And while I would still have use for the trim panels that makes them a bit pricy for something that I will be using to make a mould from.

Do all American Z's have all red rear lights or is it just the photo?
 

Robotsan

Club Member
If someone was heading nearby and would be willing to post them that would be great. Although looking at the photo I am now seeing that both lights are red, so that may not be what I need. And while I would still have use for the trim panels that makes them a bit pricy for something that I will be using to make a mould from.

Do all American Z's have all red rear lights or is it just the photo?

Yep, US market have red indicators. UK and JDM use amber.

What are you making out of interest, new lenses? @Minksport might have what you're looking for.
 
  • Like
Reactions: Ian

Ian

Club Member
I may get dislike on here since I'd be changing the car from stock, but I plan to make a sort of MZR style one piece trim but for the 260Z which will also do away with the reverse lights and change them to small (1p size) but bright LED ones. I'm not willing to test an idea for the placement on my own tail lights so I wanted a second set for that. So I still would have in stock all the original parts. The trim will be made in carbon fibre and I may or may not paint it.

The trims won't be useable afterwards as I'll have to join them together to make them one piece for the shape of the mould. I know I already have 2 spares for one side at home, and may also have a spare of the other side, but I can't remember and wont be at home to check for another month.
 

Ian

Club Member
Sorry for messing your thread @SacCyclone. If it were possible to get just the trims and not the lights for a reduced price I would be interested.



Sorry Jonbills, but it looks like they are also both red? And the trims are the 2+2 trims.
 

SacCyclone

Club Member
Sorry for messing your thread @SacCyclone. If it were possible to get just the trims and not the lights for a reduced price I would be interested.



Sorry Jonbills, but it looks like they are also both red? And the trims are the 2+2 trims.
Not messing up my thread, i enjoy when people discuss and share information.

Ian, if you decide these may work for you I can drop the price to $200.....no problem if you want to take a pass as they will sell here in the states when I decide to post them up.
 
Top