1988 Z31 parts

[chappo123]

Hi - I'm after some parts as a starter for my project.

Driver door interior release handle assembly. (I have to open the window and use the outside handle!).

drivers side facelift front wing in good condition

Rear drivers wheel arch section in good condition - to replace rear lower arch section.

Nearside front wheel arch liner.

Injector fan - top airflow parts (I have the fan and attached blow pipe.

nearside rear light cluster.

bonnet struts

toolkit - everything missing.

16" facelift anthracite turbo alloys.

Thanks

Steve

 

[Mr.F]

Diver's side facelift front wing - new with some tiny transit dents - £150 + VAT.

 

[mrM]

struts get new because most are on there last legs by now,unless you can find somebody in the uk the cheapist i found are from austrialia,thats where i got mine from,your looking at roughly £50 after customs charges

 

[chappo123]

Thanks - I have some used ones on the way, so hopefully they are better than the ones on.

 

[Northerner]

Think I have a pair of rear lights

 

[chappo123]

Thanks- sent you a PM. cheers

 

[mrM]

ive been up in the spares crawl space today after z parts,ive good the full toolkit in good condition with the foam piece if needed,the only thing missing is the 5 nuts for the space saver spare if you have one of those,they may turn up......its just finding them...

 

[chappo123]

Thanks for doing that! I've actually got some on the way with some of the other sought items.

 

[chappo123]

Update on parts needed..

Rear drivers wheel arch section in good condition - to replace rear lower arch section.

Nearside front wheel arch liner.

Injector fan - top airflow parts (I have the fan and attached blow pipe.

Rear brake calliper's or just the offside rear.

left and right rear handbrake cables

many thanks

 

[mrM]

Update on parts needed..

Rear drivers wheel arch section in good condition - to replace rear lower arch section.

Nearside front wheel arch liner.

Injector fan - top airflow parts (I have the fan and attached blow pipe.

Rear brake calliper's or just the offside rear.

left and right rear handbrake cables

many thanks

rear drivers lower arch-you ll be lucky to find one in good nick but hey anythings possiblemight be a fabrication job by the welder doing it,hes going to have to fabricate a bit by that rear window anyway,if hes any good it shouldnt be a problem,i made my own ------ rear brake caliper if you cant find one,a company called big red will sell you a refurb kit or refurb your calipers,i can find their number if you want it ------ handbrake cables-if they are anything like the mk1s which is probably the same cable then hard to find,if you cant find any, unless they are snapped it might be worthwhile to take them off and try and unseize them,ive held the tops before lightly in a vice and squirted thin penertrating oil or wd40 down the liners which can take time,eventully it will flow down the liner and out onto the floor,and pull back and forth with molegrips attached to the metal ends on the cable

 

[chappo123]

Thanks for that. Managed to track a hand brake cable down, albeit not cheap for a bit of wire!

Found some calipers as well, I believe the turbo and NA calipers are different, but any idea if 1988 NA's are any different from 1987 NA's. Can't seem to find the part numbers.

thanks

 

[chappo123]

Think I have the answer on the calipers - they appear to be the same.

 

[mrM]

im a mk1 man,but they most likely are the same calipers turbo or na that is the case on the earlier models just different variations on the disc size

 

[chappo123]

Thanks

 

[Northerner]

check on brakeparts.com

 

[chappo123]

Thanks. No stock of cables or calipers.

 

[chappo123]

Update

Brake cable sorted (assuming it is actually in stock as listed)
Calipers - going to get them refurbished at Brake Caliper Specialists

Does anyone have a front number plate holder or know where I can get one from. Never seen any for sale. Bought a generic one from ebay but isn't a good fit.

Thanks