Search results

Just spotted an early 1970 240z for sale here in Ireland. I've never seen or even heard about this car before but looks to be in good shape from the pics. Fully restored Datsun 240z For Sale in Dublin : €18,000 - DoneDeal.ie

Hi all, Ok ide like to point out that I am hopeless at wiring. First off this is what I purchased JEGS Performance Products 10569 JEGS Electric Fan Wiring Harness Kits Heres the instructions for the above http://www.jegs.com/InstallationInstructions/500/555/555-10569.pdf I also...

Hi all. Thought some of you may be interested in this. Seems to be quiet a rare 300zx 300ZX Version-S - Octane.ie Forums

Hi all, Ever since I got my car 3 years ago its always been sitting lower on the back, I put this down to worn rear shocks, I put in a set of tokiko illumina last summer thinking this would cure it but its still the same, Its sitting approx 35mm lower in the rear, Anyone have any idea's why...

Hi All, Ive always had a problem getting a good seal on the cam cover, My cam towers are shimmed so the top of the tower is sitting against the small plate that is on one side of the valve cover. Whats the purpose for this plate? Also there is some kind of hard sealant around the edge of the...

Hi all, Ive been offered a HI-6 ignition box and ps91 coil fairly cheap, cheap as in very cheap as the owner doesn't know if it works. It has a rev limiter built in and supposed to give a better spark, thats all I know about it. Anyone know if these are any good? or worth my while taking a...

Hi all, Right I have the head off my engine, I was changing to a schneider stage 3 cam but thought ide take the head off and freshen everything while im at it. My p90 head was shaved 2mm to higer the compression, but I used the standard valves that came with the head, Im I right in saying I...

I came across this earlier today and have spend the last 4 hours reading it, includes a detailed l28 engine build too, someone might find it interesting. Japanese Nostalgic Car :: View topic - JNC Project Hakosuka Build Thread

Hi all, The cam lobes on my Schneider cam have started to ware slightly, so im going to getit changed, I was thinking of going for the Rebello 63di cam, Does anyone have any experience with this cam? Cheers, Jay

Just came across a very interesting thread over on hybridz...........some of the methods the japanese are using to get up to 400bhp from their L6's Japanese N/A L6 400hp, how they do it, pictures I've found, etc. Not 56k safe - HybridZ - Page 2

Hi all, Just a quick question to those of you who have done the s14 box swap, Do the origonal gearbox mounts need altering? if so is there much involved, I was gonna start this tomorrow but not going to start it until I know exactly whats involved with the mount. Cheers

Hi all, I want to check my valve clearance's, I think they are supposed to be .08 in .10ex, But is the the same for all cams or are cams with higher lift different? Cheers :thumbs:

hi all i have a wideband that i havent got round to fitting yet. but im gonna try get it done during the week. whats the best location for the sensor in the exhaust? some say as close to the header as possible and others say further back. where have you your sensor fitted? many thanks jay.

Hi all, Dont think my volts gauge has ever been working, so had an hour to spare today and took it out, connected the gauge directly to the battery and getting 12v so the gauge is fine. I checked the 3 pin connector and im not getting any reading, so im guessing there's a break in the wire...

http://www.youtube.com/watch?v=E6rY1-pbeNM&feature=player_embedded

Hi all, I have everything ready to do the swap but was wondering how you get the speedo to work as the s13/14 box has an electronic speedo? Cheers

Came across this car and thought it might be of interest, Helps if you can read Japanese, I just used the translation function. Battle￾@s30z

Hi all, I bought a set of these shocks a couple of weeks ago, went to fit them today and ran into a problem. When ordering the shocks I was asked for year and model, I told him its book and its a 1974 260z 2+2............he then asked me was it an early or late.............I checked the log...

Just came across this video..........Does he know what he's talking about? I always thought the 432 meant 4 valves per cylnder, 3 carbs, and 2 cams? YouTube - 1972 Fairlady 240 Z

Just came across this today, just a short clip but its a good one, never laughed as much :rofl: http://www.youtube.com/watch?v=U33Xg91HAlo