Search results

  1. twoforty

    L28 ET project

    http://www.ebay.co.uk/itm/271412921474?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 head now on ebay.
  2. twoforty

    L28 ET project

    Another pic
  3. twoforty

    L28 ET project

    Finally my P90 head has been finished. It's had combustion chamber modifications, the material around the spark plugs has been removed to allow for higher boost without detonation. The valves have been changed for larger Ferrea stainless steel valves ...44mm intake 35mm exhaust. The head has...
  4. twoforty

    Holset Turbo

    Lovely, That will bring a smile to your face once you get it hooked up :)
  5. twoforty

    L28 ET project

    Lol , How much are you selling it for ? Is it an Auto?
  6. twoforty

    L28 ET project

    Thanks, a previous owner asked BMW to fit AC Schnitzer bodywork, suspension and wheels, the car only has 55k miles from new with full history. It even had extended warranty until it was parked up 6 years ago. I agree though, it looks a lot more aggressive than standard.
  7. twoforty

    L28 ET project

    Yep it has 2 ecu's, one for each 6 cyl plus a 3rd ecu for fly by wire throttle. I have removed the chips and have dual emulators plugged into the engine ecu's ......basically I can adjust fuel and ignition like an after market ecu but keep it all stock. It has active rear steering, traction plus...
  8. twoforty

    L28 ET project

    Hi George. Yes a CSi :) How are you ? No I've not seen the Z but the owner contacted me yesterday saying its been sat in a body shop for 2 years and is. About to hit the streets again. How is your car coming along ?
  9. twoforty

    L28 ET project

    Long time no Z. Nice to see a lot of Z projects still on going. I have my modified cylinder head for sale. It has all new stainless valves, gas flowed and modified combustion chambers. Would be great for turbo build. I went from an L6 turbo to a 5.6 V12 :)
  10. twoforty

    Pimp my arcade machine - Enigma II

    Probably need to remove it to test it, you should get around 0.500 ish with one lead on the base and the other on the emitter or collector...if you don't see anything use the other lead on the base and try again. You shouldn't get anything between the emitter and collector.
  11. twoforty

    Interesting thead for all you engine builders out there

    Yeah I know steve......but then I guess a 2.8 at 1 bar is more like a 5.6 :)
  12. twoforty

    Interesting thead for all you engine builders out there

    That calculation gives my old engine a BMEP of 296 :p
  13. twoforty

    240z for sale 1974

    Rob I looked at it on Friday, the body is very solid, not a hint of rust and all good panels/seems etc. Really the only thing it needed were the brakes/clutch freeing/replacing....brake lines calipers maybe, exhaust, heater hoses and a good clean. Probably one of the most solid 240's I've ever...
  14. twoforty

    I 'ate old cars!!!

    I remember doing this when I had carbs on my car....I tried to remove the exhaust system that was rusted onto the downpipe.....lost my temper and ended up breaking it...I then threw it at my house in anger.....it bounced off and smashed the back light on the Mrs golf.......right that's it I said...
  15. twoforty

    240z for sale 1974

    Sure I can if Stan is happy for me to do that.
  16. twoforty

    240z for sale 1974

    I'm only 10 miles from Warminster, I can take a good look at it if anyone wants.
  17. twoforty

    Pimp my arcade machine - Enigma II

    you need to have your meter on diode setting to check the transistor, It could be one of the other transistors on the board, I expect the smoke was a resistor burning up from having too much load on it.
  18. twoforty

    Uni-T UT101 Multimeter, anyone got one?

    CALTEK CM1604 DIGITAL MULTIMETER AUTO-RANGING TEST on eBay (end time 25-Mar-10 18:59:57 GMT) for the money these are great...very accurate and auto ranging.
  19. twoforty

    location of wideband in exhaust

    Depends on the engine but mine likes to idle at 13.5:1, shouldn't need anymore than 12.5:1 at WOT (wide open throttle) and you can get away with lean numbers 15:1 on light pedal cruising.
  20. twoforty

    location of wideband in exhaust

    You could have 6 of them, i in each pipe for the best results but in the real world you could fit it just after all 6 merge ...fit it between 9pm and 3pm if looking at the pipe....stops condesation from sitting on the sensor. Very important not to have any exhaust leak or it will screw up the...
Top