Search results

Hello all having i little problem with my brakes . all working great put every now and then the dash brake light comes on with a drop in pedal pressure one pump of the pedal are all back to normal could this be a doggy proportional valve as i think its the original one or so air in the system...

Hi all not posted for a long time so this is a question about a 280z upgrade i have tried to do using a toyota hilax master cylinder and booster . all plummed in well but no front brake at all could this be the proportional valve .is the anyone with a similar set up any help please . Chris

Hello all anyone fitted power steering on a 280z or know any links many thanks Chris

Hi all z fans not posted for a long time got the old rust bucket out and my left rear brake cylinder was jammed solid after prizing the brake cover off . so can anybody help me with a new cylinder or point me in the direction of shop or a nice new one in the back of the garage .many thanks chris

hell fellow z fan just a quick quize for all you 280z owners . got the car out after is winter sleep but shes awoke in a bit of a mood . car ticks over fine but on giving her some gas she judgers as if no fuel then pick up and judger again . only change is i fitted a billet fuel rail but rev...

Hello all just a quick update on the bane of my lift ie datsun 280z . after 2 years restoring the car it still fights me all the way . i think it toying with me it leads me up the garden path as it runs great for a month and then F-up .the new problem running rough and misfiring and i think...

Hi everybody does anybody know where i can buy a new carbon canister filter or has someone got a spare to sell me ? thanks chris

Hello everyone has anybody fitted a billet fuel rail to a 280z and if so can you recommend a adjustable FPR . looking at a sytec but not 100% many thanks chris

Hello all Z fan her my problem . took the 280z yesterday for a blat and i great time was had by all . Sunday thought give it another run so reconnected the battery and did the normal start up . it never starts first time so cranked it a little but no start . had a look at the 80a maxi fuse and...

Hi all been out in the 280z today for a run and all looked ok . but on the way back home i mate was following me and he said the car was smoking at low speed . all was ok at 65mph . not noticed it my self will do a compertion test asap . oil presure in the centre just a small raise on the gas ...

Hi all can anyone reccomend a after market billet fuel rail for a 280z so i can get rid of the metal spaghetti . if poss with a inline fuel regulator mant thanks chris .

Hi all my 280z running a little rich . ordered a vacuum meter to check for leaks but if there ok is it possible to adjust the afm its self . anyone any pointers many thanks chris.

Hi all Zfans can i pick yout brains my 280z was running great until the other day when the fused link started smoking . now car will not start got spark and fuel but no fuel at the injectors . fuesd link is damaged . is this a safety cut out to save over charging the ecu thus cutting the power...

hi guys and dolls anyone know where i can get some new rear shock tower vinyl trim ? thanks chris

hi all Zfan can i pick the great and good on the wiring for a radio. here is what i have 1st and 5th is black with blue and white may be speakers ? 2nd solid black so think its an earth 3rd green and white , blue , white,white black line and red with black line think this is the main wiring for...

hi all any club codes for the above the code CDD00142019 says invalid thanks Chris

hi all Zeders happy new year . has any one rebuild a heater valve cock ? got it all to bits so any tips on the rebuild ie what to lub the rubber seals with and do you use any sealant ? also can you get the pipes anymore . thinking off making one out of copper pipe thanks chris

hi all just about finish my 280z a few minor jobs to do . my mind as move to the cars life span so i have started to collect some parts .i have my original front valace but i would like 2 front wings . not many on ebay in the uk but plenty in the usa . so my question is anyone got 2 wings in...

hi fellow zeders any tips on removing my crankcase tube as it may foul my new exhaust is it a push fit or screw it any thanks chris

hi all anyone reccomend some one for the intake and manifold hardware . fitting a zstory exhaust so do i need ss and copper nuts any help would be great not fitted one off these . thanks Chris