Search results

Not off hand as I do it all myself. Sorry

I know my local Nissan dealer called a Crosby Park Nissan in Liverpool has a mechanic there whom used to work on them when they were new. They are a family run business and the parts manager Stu knows all about the Z’s and is able to get most things. 🤙

I’ve got a few NA spares

Free plug. In a few years these will be worth £25k

Sold to a nice guy called Martin 90 Z31T 👍🏻

FS collection from Newcastle upon Tyne.

I got a new screen fitted today after being told that it will probably crack taking it out! Well Guess what! It came out intact. It has a slight chip on the bottom which was caught by the piano wire which has been sanded slightly to remove the rough edge. This won’t affect fitment. It may have...

Check your Speedo sensor in the gearbox for broken wires or corroded terminals

I replaced the one to the left of that one! I think the bolt is to make sure that one does not flex or move. You can see the one to the left is green and corroded at the bottom. Not sure what the insides of your Speedo look like but I’d imaging it will have a power source so use a multimeter to...

Rebuilt my z31 tokico master cylinder and fitted new discs/pads.

Reg E314JVH pics attached if anyone is interested.

Facelift 88 model non turbo manual needs welding on rear subframe mount area for mot. He’s looking at £2.5k and lives in Portsmouth. I’ve asked for pics to post up

Yes me too but tbh, I’d read the manual and looked at videos on YouTube and I thought what the heck! It turned out to not be as bad as I thought. If all the gears needed coming off the shafts, I’d probably leave it to the experts but luckily mine wasn’t that bad.

Well the box is now back together. I used genuine Nissan sealant for the cases. It went together quite easily using my home made stand. The only thing to note is that upon putting the tail shaft case onto the bell housing case, you have to fit the shift lever adapter onto the shift linage before...

Hahah yes I would to know Japanese to know what they are saying! Progress been a bit slow as I’ve bought a project car! It’s a 99 Nissan Qx (maxima A32) with the. VQ30 engine All my bearings arrived. So I’ve basically changed all Four bearings on the outer parts of the shafts. I’m not...

Build myself a quick gearbox stand so aid putting the cases back together

Well the Fsm is not much good as it just goes in detail about fully stripping down the box so the power of YouTube has come to the rescue. I’ve found a link to a guy stripping a similar box and unfortunately you have to remove the two nuts off the main shafts and a few cogs to get to the reverse...

Update so I split the casings off the shaft today which was a bit tricky as someone had been in there before and used black rtv. Had to use a blade to start it off as I did not want to crack the casing with a rubber mallet. The bell housing took the longest. To do this you have to take off the...

Wow rare as rocking horse poop! Great find! We got the fj20 model but in n/a only which didn’t sell well. What are your plans ?

Cheers for that! Been slow going due to working and bad weather as I’m doing this outside! I’ve now got the other bearing which is made by Nachi 22BC06S5X which was under £20 on flebay. I also had to source a shim that goes inside the housing as mine was falling apart! Hopefully I’ll get...