I know my local Nissan dealer called a Crosby Park Nissan in Liverpool has a mechanic there whom used to work on them when they were new. They are a family run business and the parts manager Stu knows all about the Z’s and is able to get most things. 🤙
I got a new screen fitted today after being told that it will probably crack taking it out! Well Guess what! It came out intact. It has a slight chip on the bottom which was caught by the piano wire which has been sanded slightly to remove the rough edge. This won’t affect fitment. It may have...
I replaced the one to the left of that one! I think the bolt is to make sure that one does not flex or move. You can see the one to the left is green and corroded at the bottom. Not sure what the insides of your Speedo look like but I’d imaging it will have a power source so use a multimeter to...
Facelift 88 model non turbo manual needs welding on rear subframe mount area for mot. He’s looking at £2.5k and lives in Portsmouth. I’ve asked for pics to post up
Yes me too but tbh, I’d read the manual and looked at videos on YouTube and I thought what the heck! It turned out to not be as bad as I thought. If all the gears needed coming off the shafts, I’d probably leave it to the experts but luckily mine wasn’t that bad.
Well the box is now back together. I used genuine Nissan sealant for the cases. It went together quite easily using my home made stand. The only thing to note is that upon putting the tail shaft case onto the bell housing case, you have to fit the shift lever adapter onto the shift linage before...
Hahah yes I would to know Japanese to know what they are saying!
Progress been a bit slow as I’ve bought a project car! It’s a 99 Nissan Qx (maxima A32) with the. VQ30 engine
All my bearings arrived. So I’ve basically changed all Four bearings on the outer parts of the shafts. I’m not...