Recent content by chris frizzell

  1. chris frizzell

    280z dash brake light comes on

    Hello all having i little problem with my brakes . all working great put every now and then the dash brake light comes on with a drop in pedal pressure one pump of the pedal are all back to normal could this be a doggy proportional valve as i think its the original one or so air in the system...
  2. chris frizzell

    280 z brake booster upgrade

    dont know Mike none of it worked , put the old master cylinder on still the same problem and res as gone down so there may still be air with in the system . i think the problem with the hilux MC is it thinks its got disc brake all round but i still have drum rears so may have to remove the check...
  3. chris frizzell

    280 z brake booster upgrade

    Hi all not posted for a long time so this is a question about a 280z upgrade i have tried to do using a toyota hilax master cylinder and booster . all plummed in well but no front brake at all could this be the proportional valve .is the anyone with a similar set up any help please . Chris
  4. chris frizzell

    power steering for a 280z

    Thanks Sean was looking on French ebay for a rack so any more info is great if you get chance the gent on you tube is called Mike Hunt yes realy .He does some great mod iam doing the brake booster up grade with a Toyota hi lux . many thanks Chris
  5. chris frizzell

    power steering for a 280z

    looking to use mazda mx5 power steering rack or may be a electric nova rack . the mazda looks good bloke on youtube done it only prob is i have to get a LHD rack and a few other bits
  6. chris frizzell

    power steering for a 280z

    Hello all anyone fitted power steering on a 280z or know any links many thanks Chris
  7. chris frizzell

    rear brake cylinder

    yep order one thanks for the tip
  8. chris frizzell

    rear brake cylinder

    Hi all z fans not posted for a long time got the old rust bucket out and my left rear brake cylinder was jammed solid after prizing the brake cover off . so can anybody help me with a new cylinder or point me in the direction of shop or a nice new one in the back of the garage .many thanks chris
  9. chris frizzell

    The Yorkshire Members List

    Chris Doncaster 280z
  10. chris frizzell

    FREE: Does anybody want any fuel injected parts before they’re binned?

    ive got a 280z dont lob them . where are you ? may be able to pick them up thanks chris
  11. chris frizzell

    280zx coughs and sputters

    my 280z has all these problems every it laid up ,like everyone says the key area to look at is the temp send the thermotine and the conection to the cold starter clean them up .also i have a billet fuel fail with a aftermarket FPR and it should run about 38 to 42 psi good luck .
  12. chris frizzell

    Stone chipping

    dont have a clear line .get the paint shop to blend it up .
  13. chris frizzell

    Various s30 parts for sale

    ho yes but you do have to sqint a lot and be wasted
  14. chris frizzell

    Advice on this 240z please

    look like a solid US car the factory underseal will be toast but dont worry good chance the metal is solid . try to get some photo of the inside floor pan and inner wings .chris
  15. chris frizzell

    Various s30 parts for sale

    doncaster the metroperlis of the north the gate way paradise
Top