Anyone after some 260Z 2+2 parts?

IbanezDan51

Well-Known Forum User
Not that I have a lot... but something might be useful..

IMG_7738.jpg

Has most suspension, prop, some interior back seats..

A roll cage which may fit a 2 seater? Its an old "vintage" Adey Bars type bolt in rear hoop. Glass, inner door skins etc. Some Cobra seats fitted which would need repair.

The wheels on it are Enkei, 7J width 14inch. I haven't seen these anywhere else, they are really nice and im debating keeping them... as supposedly 14" wheels are cool.

Dan
 
Last edited:

IbanezDan51

Well-Known Forum User
Hi have you got a n/s door card in good nick.
Thanks

The drivers side is pretty good - nearside isn't so flat anymore because it was removed and left in the car on an angle but might straighten out OK? I can get you some pictures and send them too you.

Dan
 

Rob Gaskin

Treasurer
Staff member
Site Administrator
The roll hoop will be John Aley. I might be interested if it would fit a 2 seater, is it at your Dad's place? It's so far back from the driver I suspect it will be for a 2 seater.
 

IbanezDan51

Well-Known Forum User
The roll hoop will be John Aley. I might be interested if it would fit a 2 seater, is it at your Dad's place? It's so far back from the driver I suspect it will be for a 2 seater.

Hi Rob,

There is quite a bit of clearance between it and the roof line. It is indeed at the garage.

The rear sear can obviously not fold up however...

I can try to remove it this weekend, youre always welcome to pop down and have a look. Yes you are right it is Aley sorry misspelt in my above post.

Hope youre okay mate

Dan
 

richiep

Club Member
Wow - that one is bad! Was it living in some undergrowth? There's greenery hanging off it here and there.

Are there any bits of the shell that aren't rusted to hell? :EXTRAeek:
 

IbanezDan51

Well-Known Forum User
Wow - that one is bad! Was it living in some undergrowth? There's greenery hanging off it here and there.

Are there any bits of the shell that aren't rusted to hell? :EXTRAeek:

Shock towers, and about 3 inches of the front chassis rails... Some of the bulkheads OK but it was used for a donor... Surprisingly though all the suspension components and subframe all look like they have come off of a Cali car rather than this swamp donkey.

Dan
 

IbanezDan51

Well-Known Forum User
Wot you asking for suspension struts and diff ?

There is no diff mate - but im completely open to offers on the lot. Will get it dropped off the car tomorrow - just PM me. If its going to a member to help them out I'll be more than fair with prices.

Dan
 

status

Well-Known Forum User
Meant prop which I reckon about £50 and £50 a side for the struts,don’t need discs or inserts it’s all just going to be sitting around in case car goes back to standard
 
Top