itb’s kit

[Kamil]

Hi guys

I found that kit (brand new ) what I think good price for £1600
Itb,s kit :
New inlet manifold
Three Taper bore DCOE fitment throttle bodies.
Fuel rail kit injectors and throttle position sensor
Stainless throttle linkage

I have l28 with N47 head but don’t know what is in side (upgrades ) so I presume is stock
So I have a cpl of questions

What else I would need to compleat the kit ?

Dose the stock ecu will cope with that ?

Please let me know any advice much appreciated

Thanks
Kamil

 

[johnymd]

You won’t need too much.
Crank triger wheel
Crank angle sensor
Air temp sensor
Water temp sensor
Cam position method (for 720sync)
Ecu and loom
HP fuel pump and regulator
Cop’s

You will need the above as a minimum for any Mapable fuel and spark system. You may be able to use some parts from a 280z/280zx fi system.

 

[SeanDezart]

This ? https://www.efihardware.com/products/1750/pro-race-kit-6-cylinder-454340mm

Plus shipping and maybe customs. Why not ask THEM as they list the rest as POA ?

 

[jonbills]

I don't think you'll run that with the stock ECU without a lot of work, it's built for a common throttle body.
I think you'll need a new one.

 

[Kamil]

You won’t need too much.
Crank triger wheel
Crank angle sensor
Air temp sensor
Water temp sensor
Cam position method (for 720sync)
Ecu and loom
HP fuel pump and regulator
Cop’s

You will need the above as a minimum for any Mapable fuel and spark system. You may be able to use some parts from a 280z/280zx fi system.

Do I need lambda sensor as well?
What’s the cop’s ?

 

[Kamil]

This ? https://www.efihardware.com/products/1750/pro-race-kit-6-cylinder-454340mm

Plus shipping and maybe customs. Why not ask THEM as they list the rest as POA ?

I will try them thanks for that

 

[Kamil]

I don't think you'll run that with the stock ECU without a lot of work, it's built for a common throttle body.
I think you'll need a new one.

Yea that was what I was thinking