240z brake discs for samuri

Mr Ex Jnr

Mr Ex Jnr

Club Member
hi seeking advice for the samuri its got 4 pot calipers on, need new discs for test now i have spoken to mike, he say he belive spike put peugeot discs on as they were thinner to compensate the bigger 4 pots.

now i could get the discs skimmed but there only so much meat on the discs and there will come a point were ill need some new ones just seeing if anyone out there got any more info

need a brake syrvo aswell if anyone got one mike moving at the min
 
Rob Gaskin

Rob Gaskin

Treasurer
Staff member
Site Administrator
If they are Pug 505 GTi discs (good chance) they will be vented not solid.

Any pics of your set-up?

So you have 4 pots - are they Range Rover and do they have a spacer of about 5mm between each half to fit over the vented (wider disc)?

You need to go to a motor factor with your's and compare with Pug's.

Then take all your discs to an engineering firm to drill more holes for the studs (Pug spacing is not Datsun spacing) and open the centre hole to clear the hub.
 
Mr Ex Jnr

Mr Ex Jnr

Club Member
yeah got range rover 4 pots on I haven't had the wheel off to look at the set up but I will be doing soon,

ill get pics of set up when I take wheel off

yeah no few people that are engineers
 
Rob Gaskin

Rob Gaskin

Treasurer
Staff member
Site Administrator
Christian, they may be the right disc but I only know that mine were for a 505 Gti.
 
Mr Ex Jnr

Mr Ex Jnr

Club Member
hmm took disc off sunday and put it up against the peauget 505 disc totally different sort of discs they are.
the Datsun one has a separate disc that bolt on to an external hub that has the stud in and the bearing I need to upload a photo of the disc, anyone got any suggestions' on what disc they could be the disc is 1" thick
 
Mr Ex Jnr

Mr Ex Jnr

Club Member
few pics of the disc
 

Attachments

  • 20150630_182949.jpg
    20150630_182949.jpg
    450.7 KB · Views: 90
  • 20150630_183008.jpg
    20150630_183008.jpg
    661.5 KB · Views: 88
Rob Gaskin

Rob Gaskin

Treasurer
Staff member
Site Administrator
Mr Ex Jnr said:
hmm took disc off sunday and put it up against the peauget 505 disc totally different sort of discs they are.
the Datsun one has a separate disc that bolt on to an external hub that has the stud in and the bearing I need to upload a photo of the disc, anyone got any suggestions' on what disc they could be the disc is 1" thick
Click to expand...

Can't help but 1" thick?

Four suggestions:

Separate the disc from the hub and take it to a brake 'Motor Factor' to see if they can help identify it.

Measure the disc and try try to identify it yourself off the internet.

Contact Kevin Irons (ex Samuri partner) who may know what options they used. I might be able to help you with that.

Fit a new combination of Disc and caliper.
 
Mr Ex Jnr

Mr Ex Jnr

Club Member
aright i took the 505 discs back today as they were based in Huddersfield bought of ebay tho, so they took some measurements off the disc and there ringing up Monday to find out and there going to get back to me
 
Mr Ex Jnr

Mr Ex Jnr

Club Member
tim (zedbloke)

found these disc on here for zed
fhttp://www.apracing.com/product_details/race_car/brake_discs/ventilated_discs/%C3%B8260mm/25.4mm_thickness/139.7mm_p.c.d.-bolted-cp4448-226/227.aspx

no else have this setup of brakes on there s30
 
You must log in or register to reply here.
Top