No username? Register here.
  #1  
Old 23-11-2017, 06:50 PM
Fairlineguy's Avatar
Fairlineguy Fairlineguy is offline
Z Club member
Second gear
 
Join Date: May 2015
Location: Bath
Posts: 198
Member 1033
Today's Dyno results

My plan was to run with the stock rb25 ecu but last week I bit the bullet and had installed a Link G4 ecu.
Today Richard at Rising sun (bells autos) set up the ecu with a couple of maps which can be switched via a switch inside the car.
The link ecu has a couple of other features which can be wired in One would provide traction control with addition of a couple of extra sensors
But for the time being its also operating the cooling fans and will control the a/c compressor



Sent from my iPad using Tapatalk
Reply With Quote
  #2  
Old 23-11-2017, 07:28 PM
Fairlineguy's Avatar
Fairlineguy Fairlineguy is offline
Z Club member
Second gear
 
Join Date: May 2015
Location: Bath
Posts: 198
Member 1033
http://youtu.be/KQQbfytv6R4
Reply With Quote
  #3  
Old 23-11-2017, 07:49 PM
SeanDezart's Avatar
SeanDezart SeanDezart is offline
Z Club member
Sixth gear
 
Join Date: Sep 2002
Location: Pouzauges 85700 France
Posts: 18,788
Member 559
Well.....that could have been better.......
__________________
A new Datsun era !

Sean Dézart
(33) 6 14 95 42 17
seanz@wanadoo.fr

https://www.facebook.com/pages/Zstor...6789934?ref=hl

Club Datsun-France www.datsun-france.com

I Love Zs.
Reply With Quote
  #4  
Old 23-11-2017, 08:48 PM
Wyn's Avatar
Wyn Wyn is offline
Z Club member
Sixth gear
 
Join Date: Sep 2004
Location: Bucks
Posts: 4,991
Member 645
Well done m8

Give it a few mths n you'll be looking for more lol

(btw you want to vent that breather into a catch tank. else you'll end up with oil everywhere after a while)
__________________
It’s not that windy
Reply With Quote
  #5  
Old 23-11-2017, 08:51 PM
franky franky is online now
Z Club member
Sixth gear
 
Join Date: Sep 2011
Location: usually work
Posts: 3,289
Member 770
Quote:
Originally Posted by Fairlineguy View Post



Sent from my iPad using Tapatalk
Which way round does the paint code sticker go?
Reply With Quote
  #6  
Old 23-11-2017, 09:09 PM
SeanDezart's Avatar
SeanDezart SeanDezart is offline
Z Club member
Sixth gear
 
Join Date: Sep 2002
Location: Pouzauges 85700 France
Posts: 18,788
Member 559
Quote:
Originally Posted by franky View Post
Which way round does the paint code sticker go?
As one opens the bonnet it stares at you - Neil's is the correct way around.
__________________
A new Datsun era !

Sean Dézart
(33) 6 14 95 42 17
seanz@wanadoo.fr

https://www.facebook.com/pages/Zstor...6789934?ref=hl

Club Datsun-France www.datsun-france.com

I Love Zs.
Reply With Quote
  #7  
Old 23-11-2017, 09:17 PM
Fairlineguy's Avatar
Fairlineguy Fairlineguy is offline
Z Club member
Second gear
 
Join Date: May 2015
Location: Bath
Posts: 198
Member 1033
Quote:
Originally Posted by Wyn View Post
Well done m8

Give it a few mths n you'll be looking for more lol

(btw you want to vent that breather into a catch tank. else you'll end up with oil everywhere after a while)
Don't know about that? Rich did say that bigger injectors and turbo would get me
450hp ish with stock engine internals.
At least with the new ecu set up the foundations are there for future work.
I do have a bulkhead catch tank for the breather just not fitted in the photo

Just got to complete the small job list on the white board in the garage then
Out on the road
Reply With Quote
  #8  
Old 23-11-2017, 10:34 PM
Wyn's Avatar
Wyn Wyn is offline
Z Club member
Sixth gear
 
Join Date: Sep 2004
Location: Bucks
Posts: 4,991
Member 645
Quote:
Originally Posted by Fairlineguy View Post
Don't know about that? Rich did say that bigger injectors and turbo would get me 450hp ish with stock engine internals.
At least with the new ecu set up ...
What did I say lol

The seed is sown
__________________
It’s not that windy
Reply With Quote
  #9  
Old 23-11-2017, 11:36 PM
Fairlineguy's Avatar
Fairlineguy Fairlineguy is offline
Z Club member
Second gear
 
Join Date: May 2015
Location: Bath
Posts: 198
Member 1033
Quote:
Originally Posted by Wyn View Post
What did I say lol

The seed is sown
Ahh
Not sure that old dodgy sump of yours will be up to it. Lol 😀
Joking aside its doing its job and saved me loads of hassle👍
Reply With Quote
  #10  
Old 24-11-2017, 06:05 PM
Dave B Dave B is offline
Z Club member
Second gear
 
Join Date: Oct 2015
Location: Chesterfield
Posts: 150
Member 1069
Standard turbo and injectors? Seems a very good result 😎
Wonder if the aftermarket inlet manifold helps there. I had a link g4 on my R32 gtr, supposed to be one of the best Ecu’s out there


Sent from my iPhone using Tapatalk
Reply With Quote
  #11  
Old 25-11-2017, 10:09 AM
franky franky is online now
Z Club member
Sixth gear
 
Join Date: Sep 2011
Location: usually work
Posts: 3,289
Member 770
Quote:
Originally Posted by SeanDezart View Post
As one opens the bonnet it stares at you - Neil's is the correct way around.
I can't picture it, genuine question as you could see the point either way. The sticker would have been put on in advance of the bonnet at the factory so I can picture it the other way.

I can't find the pic of my car with the original sticker on.
Reply With Quote
  #12  
Old 25-11-2017, 02:13 PM
SeanDezart's Avatar
SeanDezart SeanDezart is offline
Z Club member
Sixth gear
 
Join Date: Sep 2002
Location: Pouzauges 85700 France
Posts: 18,788
Member 559
https://www.zeddsaver.com/products.html

Scroll down - it's facing the engine....as per Neil's car.
__________________
A new Datsun era !

Sean Dézart
(33) 6 14 95 42 17
seanz@wanadoo.fr

https://www.facebook.com/pages/Zstor...6789934?ref=hl

Club Datsun-France www.datsun-france.com

I Love Zs.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 08:19 AM.

The Future Is Bright... The Future Is ZClub!

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright © ZClub.net, All Rights Reserved.