NZR - Essential Garage Tools

Gio

Well-Known Forum User
Hallo fellow Zs,

on my trails thru the wild and woolly internet, I occasionally stumble across stuff which makes me grin. At least a bit.

Sometimes I even get up the courage to post it. So here's a (slightly US biased) list of the 10 essential tools. Stolen from a Jag mailing list from the States. Who says they don't have a GSOH?

------------------------------
Since this site often contains non-technical banter and humor, I will share this tidbit that a friend sent me concerning very valuable tools that we all have used and are familiar with:

Forget the Snap-On Tools truck; its never been there when you need it. Besides there are only 10 things in this world you need to fix any car, any place, any time.

1) Duct Tape - Not just a tool, a veritable Swiss Army knife in stickum and plastic. Its safety wire, body material, radiator hose, upholstery, insulation, tow rope, and more in an easy to carry package. Sure, there's prejudice surrounding duct tape in concours competitions, but in the real world, everything from LeMans winning Porches to Atlas rockets use it by the yard. the only thing that can get you out of more scrapes is a quarter and a phone booth.

2) Vice Grips - Equally adept as a wrench, hammer, pliers, baling wire twister, breaker-off of frozen bolts and wiggle-it-til-it falls-off tool. the heavy artillery of your tool box, vice grips are the only tool designed expressly to fix things screwed up beyond repair.

3) Spray Lubricants - A considerably cheaper alternative to new doors, alternator, and other squeaky items. Slicker than pig phlegm, repeated soakings will allow the main hull bolts of the Andrea Doria to be removed by hand. Strangely enough, an integral part of these sprays is the infamous little red tube that flies out of the nozzle if you look at it cross eyed (one of the 10 worst tools of all time).

4) Margarine Tubs with Clear Lids - If you spend all you time under the hood looking for A frendle pin that caromed off the petal valve when you knocked both off the air cleaner, it's because you eat butter. Real mechanics consume pounds of tasteless vegetable oil replicas just so they can use the empty tubs for parts containers afterward. (some of course chuck the butter-colored goo altogether or use it to repack wheel bearings.) Unlike air cleaners and radiator lips, margarine tubs aren't connected by a time/space wormhole to the Parallel Universe of Lost Frendle Pins.

5) Big Rock at the Side of the Road - Block up a tire. Smack corroded battery terminals. Pound out a dent. Bop noisy know-it-all types on the noodle. Scientists have yet to develop a hammer that packs the raw banging power of granite or limestone. This is the only tool with which a "made in India" emblem is not synonymous with the user's maiming.

6) Plastic Zip Ties - After 20 years of lashing down stray hose and wiring with old bread ties, some genius brought a slightly slicked up version to the auto parts market. Fifteen zip ties can transform a hulking mass of amateur quality wiring from a working model of the Brazilian Rain Forest into something remotely resembling a wiring harness. Of course it works both ways. When buying a used car, subtract $100 for each zip tie under the hood.

7) Ridiculously Large Standard Screwdriver - Let's admit it. There's nothing better for prying, chiseling, lifting, breaking, splitting or mutilating than a huge flat bladed screwdriver particularly when wielded with gusto and a big hammer. This is also the tool of choice for all filters so insanely located that they can only be removed by driving a stage in one side and out the other. If you break the screwdriver-and you will just like Dad and you shop teacher said-who cares if it has a lifetime guarantee.

8) Bailing Wire - Commonly known as MG muffler brackets, bailing wire holds anything that's too hot for tape or ties. Like duct tape, it's not recommended for concours contenders since it works so well you'll never need to replace it with the right thing again. Bailing wire is a sentimental favorite in some circles, particularly with the MG, Triumph, and flathead Ford set.

9) Bonking Stick - This monstrous tuning fork with devilish pointy ends is technically known as a tie-rod-separator, but how often do you separate tie-rod ends? Once every decade if you're lucky. Other than medieval combat, its real use is the all purpose application of undue force, not unlike that of the huge flat-bladed screwdriver. Nature doesn't know the bent metal panel or frozen exhaust pipe that can stand up to a good bonking stick. (Can also be use to separate Tie-rod ends in a pinch, of course, but does a lousy job of it).

10) A Quarter and a Phone Booth - See tip #1 above
------------------------------------------------

Q1 - who hasn't used one of these tools?
Q2 - who has used all of them? (or the most...)
Q3 - got any additions?

Yours ever - a terminally cr*p mechanic Gio
 

Mr.F

Inactive
I know someone (who shall remain nameless) who used a carpenter's vice clamp across the back of a 260Z cylinder head to hold the exhaust manifold in place rather than remove everything to drill and tap the sheared bolt (probably used the twist and pull MoleGrip technique on this beforehand....)
 

zedhead260

Well-Known Forum User
My bonking stick is a putlock scaffold bar. The flat end fits nicely under the front chassis rail whilst pushing down on the anti-roll bar. It releases the tension on the track control arm for easy front strut removal.
I have a (slightly) smaller bonking stick that I keep in my pants &nbsp;<img src="http://www.zclub.net/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'>
 
Top