master cylinder

[surreyseagull]

hi all..any ideas where i can pick up a master cylinder bleed kit.doing the brakes on my 260..toyota 4 pot calipers,stainless steel hose,all hard lines brand new.and bigger master cylinder from 280 zx.
i bled all the brakes and have a bit of brakeing but not much.so im gonna bleed master cylinder which i didnt do before i put it on,..doh..cheers

 

[ben240z]

If you have fluid being pumped to the calipers then the master cylinder will not need bleeding.

Start bleeding the furthest wheel away from the cylinder and then end up at the nearest and you should have a good pedal.

Have the calipers got 2 bleed nipples on them cos if so then it may pay you to bleed them seperately as there could be air still trapped in one side which would cause the problem.

 

[surreyseagull]

cheers ben.will try that over next few days.