Inner Fender Panels

[Rob Gaskin]

Spoken to Andy today he doesn’t currently make inner wing splash guards but is planning to make them out of fibreglass but not for a couple of months also he thinks there are 2 different sizes to fit 240/260/280

Oh ok, thanks Derrick.

 

[Ian]

So, I have these sorted. But thinking It might be a good idea to make a mold from the before fitting or future. I could make some fibreglass ones if anyone is interested. Could even so top layer of kevlar if anyone wanted even stronger ones.

Either way I'll try and make mold so I have an option if needed many years down the line.

 

[Geoff-R]

So, I have these sorted. But thinking It might be a good idea to make a mold from the before fitting or future. I could make some fibreglass ones if anyone is interested. Could even so top layer of kevlar if anyone wanted even stronger ones.

Either way I'll try and make mold so I have an option if needed many years down the line.

Would take you up on this Ian, I think it would be a great thing to have a mould of them for the future as well.

 

[Ian]

Unfortunately I can not be sure I will be able to after all. Currently on rotation at work and its likely it will need to be fitted before I am home to make the old to be able to complete the metal work stage and move on to bodywork.

 

[johnymd]

Sorry, I forgot all about these (too many things going on to keep up). I'm sure I have the moulds and will try to get some made. I dont know if the various models are different as I only have 240z's.